I want to find out the adhesive strength of the coating. Coating is applied in semi-liquid state on to the surface and dried with IR dryer at ~100 C. The binder used in the coating is industrial acrylic binder.
thanks in advance...
Akhilesh Singh
There is a standardized method for determining the adhesion of coatings by peel testing in a tensile testing machine. Typically, the coating is applied to one stamp, and another stamp is glued on top with a special high-strength adhesive. In your case, you need to apply the coating in the form of an adhesive between two steel stamps of a standard tensile testing machine.
Vadim Verlotski Thankyou Sir, for the idea. I can get a quantitative data from it.
Wolfgang A Schmidt Thank You Sir for your valuable time, but the said method ASTM F 2252/ F 2252M:2013 is not suitable for my material system. Moreover, the said method is not giving quantitative result.
Pierluigi Traverso Thankyou Sir, The pull-off method with Elcometer may work with my material system.
My regards...
- Badges
- Science topic
- Similar topics
- Engineering
- Materials Engineering
- Powders