Is there a formula that I can use to calculate the power output using solar irradiance values?
Sure, contact me
Solar panel (watt) × average hours of sunlight × 75% = daily watt hour
Yes, it is possible. The general formula for standard test conditions (irradiance of 1000 W/m² and a temperature of 25°C) is;
P=A×G×η
Where:
P = the power output (in watts)
A = the area of the solar panels (in square meters),
G = the solar irradiance (in watts per square meter), and
η = the efficiency of the solar panels (typically ranging from 0 to 1, ideally 0.75).
Hope this helps,
Kind regards,
Kedar
This larva was captured using a plankton net in the Persian Gulf during the summer. I believe it may be a Facetotecta nauplius.
08 August 2024 3,746 4 View
What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?
30 July 2024 6,261 4 View
I am using CuBr/THPTA for a click reaction in total cell lysates. I am facing issues with my protein sample in non-reducing SDS-PAGE where it's not migrating properly and most of it remains at the...
29 July 2024 950 4 View
We are working on a robot that cleans solar panels using fresh water supply and a rotating brush. We are trying to conserve as much water at possible by recycling the dirty water that is collected...
28 July 2024 5,778 2 View
Is it the best optimization ratio based on experiments?
22 July 2024 8,170 0 View
Can diamond be grown using molecular beam epitaxy?
22 July 2024 9,755 2 View
Hello everyone, I am new to LabVIEW, right now we need to control the movement of an ethernet-based stage drive. We got the sample code from a collaborator but their instrument is USB-based, so we...
11 July 2024 5,385 2 View
Hi everybody, We are trying to write a systematic review meta-analysis paper. But I could find 19 references. I think 19 references are not enough to do a meta-analysis section and it is better to...
10 July 2024 5,490 5 View
I am trying to eliminate infection from my plates and therefore, gave UV treatment after addition of amino acid (used for better growth). Can you please suggest if UV destroys amino acids or not,...
02 July 2024 2,922 1 View
I have attached pics of the SH-SY5Y cells within a seeded plate after reaching >80-90% confluence. Are these dark clumps of multiple growing cell layers? Or dead cells? Any clue? many thanks.
01 July 2024 8,361 3 View
The stability of the Solar System is a complex subject that blends the classical framework of Newtonian mechanics with the modern insights provided by General Relativity (GR). Understanding this...
07 August 2024 2,569 1 View
Hello, everyone. I have tried to determine carrier motilities of some materials, by Density Functional Theory, using Quantum ESPRESSO. There are a few methods to do it, like a package called...
04 August 2024 8,894 1 View
For a grid connected BESS (lets say 100 MW/200 MWh system, LFP battery), if we charge the BESS in such a way that whenever we can access power from the solar that will charge the BESS. Hence it...
01 August 2024 9,903 7 View
What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?
31 July 2024 4,835 3 View
Is it feasible to employ an artificial sun in the experimental investigation of concentrated solar energy systems, specifically linear Fresnel systems? If the answer is affirmative, what type of...
22 July 2024 9,710 6 View
I want to know that n-doped side of solar cell is connected with positive or negative electrode.
20 July 2024 1,348 2 View
Let me say I have a solar plant in operation and I want to build up a wind power plant, and later make a hybrid so that I could power the electrolyser as load for green hydrogen production.
14 July 2024 9,547 4 View
"When solar irradiation reaches a surface, some of it is absorbed while the rest is reflected. Part of the light absorbed by the surface transforms into heat and increases the module's...
13 July 2024 8,621 5 View
How does the quarter wavelength affect the efficiency and light absorption of the cells, and what considerations need to be taken into account when applying this concept to optimize the thickness...
10 July 2024 647 5 View