What is the precursor for B-, S-, N-, and F- doped materials?

I want to synthesis B-, S-, N-, and F- doped materials with wet synthesis method. What is the precursor for this system?

31 December 2018 8,881 2 View

Effect of reductant molarity and reduction temperature?

Is there any effect of reductant molarity and reduction temperature to the grain size of nanoparticle? How are they affect it?

05 June 2016 2,085 4 View

What can I do to remove NMP from my pristine graphene solution?

Can anyone suggest the simplest method to do it?

04 May 2016 9,288 4 View

How to functionalizing pristine graphene?

I want to make a catalyst for DMFC application which i will use pristine graphene as support material. How can I functionalize the pristine graphene so I can doped my catalyst onto it?

04 May 2016 2,656 2 View

How to reduce the grain size?

I synthesized PdNiCo alloy using metal acetyl acetonate as precursor. The reducing method is polyol method. The grain size of resulting particles is 12 nm. I want to reduce it below 9 nm. Can you...

03 April 2016 6,699 7 View

What are the roles of NaNO3, H2O2, and HCl in graphite oxidation?

What are the roles of NaNO3, H2O2, and HCl in graphite oxidation reaction process?

02 March 2014 4,917 0 View

Why does blocking with my immunogenic peptide cause nuclear fluorescence in ICC?

Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...

03 March 2021 5,999 3 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

Does Napabucasin soluble in dichloromethane and in ethanol?

I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...

02 March 2021 9,945 3 View

Help request in CST microwave?

im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...

02 March 2021 2,246 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

How to remove DCU and HOBT from my reaction?

I am doing a acid and a chiral amino alcohol reaction using DCC and HOBT in DCM or THF? Can anyone suggest me how to remove DCU and HOBT from a reaction mixture??

28 February 2021 2,153 1 View

Dapi fluorescence protocol for colon cell lines ?

28 February 2021 2,534 2 View