At times the work in the paper pertains to lot of lab work and requires collaborations. However, many scientists discourage co-authorship and instead push the names in acknowledgment sections. Whats a good practice?
Both
I think authorship depends upon the level and significance of contribution
If we prepare any 2 composite specimen, with same composition, same fabrication methods under same conditions. Will it assure that we get exactly the identical image of any 2 specimen through SEM?
06 July 2014 9,230 6 View
Impact factors for journals are extremely variable. We look for old established journals with high impact factor but at the same time ones which review in short time. Is there any correlation...
05 June 2014 8,988 0 View
I am creating a single element model in Abaqus of a composite material. My goal is to match the stress-strain curve of the material which was obtained experimentally. I am using VUMAT for Fabric...
07 July 2024 10,036 5 View
I am not able to search that litrature just because of i am from physics background and that is mechanical engineering problem.
05 May 2024 8,032 3 View
advise work
17 April 2024 3,610 0 View
Is there a single JCPDS card for natural fiber ? My understanding is that all natural fibers basically have the same constituents albeit they are in different concentration. Cellulose,...
27 March 2024 5,032 1 View
I know of a place in Tamil Nadu where for one sample cost is 5000. I am looking for a cheaper alternative.
21 March 2024 6,513 1 View
I am preparing general purpose polystyrene (GPPS) glass fiber composite. I want to know what coupling agent can be used and what glass fiber grade would be suitable for GPPS
17 March 2024 8,465 1 View
swelling release mechanism of polymer undergo diffusion for silver release
04 February 2024 4,586 4 View
Is this dental material classified as ceramic? Does it contain hydroxyapatites?
31 January 2024 2,409 3 View
Hi, I took some FTIR (ATR) readings of a polymer composite (epoxy+ fumed silica+ ceramic filler) we are working on. The peaks seem to decrease in intensity with increase in ceramic and filler...
28 January 2024 2,919 7 View
I am working on Aluminum based metal matrix composite. i would like to publish my work in Scopus databased but I have limited time to get publication. please let me know which is the best and...
21 January 2024 4,653 1 View