You can start with understanding impact of distributed generation in stability by referring to a paper titled " Impacts of distributed generation on power system transient stability " ( DOI: 10.1109/PESS.2002.1043465 ).Continue with some previous work in this are like PHD thesis available. like Reza, M " Stability analysis of transmission system with high penetration of distributed generation "
If you want to have dynamic models of Micro Turbine, Diesel Generator, Fuel Cell etc for your research you can refer to the following paper
1. E. N. Azadani, C. Canizares and K. Bhattacharya, "Modeling and stability analysis of distributed generation," 2012 IEEE Power and Energy Society General Meeting, San Diego, CA, 2012, pp. 1-8. doi: 10.1109/PESGM.2012.6345141
2. J. C. Boemer, M. Gibescu and W. L. Kling, "Dynamic models for transient stability analysis of transmission and distribution systems with distributed generation: An overview," 2009 IEEE Bucharest PowerTech, Bucharest, 2009, pp. 1-8. doi: 10.1109/PTC.2009.5282177
For modeling purposes, you may either
select stability models from the literature, then build it on simulation programs such as the matlab or VSIM,
or
Use the models already available in a TD-simulation software to construct your system. I recommend the RPM-SIM; its lifetime licence costs about US$ 100. I previously used it in a private study and it was helpful.
- Badges
- Science topic
- Similar topics
- Thesis Research