Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

What are the most relevant MSc proposal topics for Petroleum Production Engineering at the moment?

I am a Petroleum Production Engg MSc student at Robert Gordon University in Aberdeen and I am in the process of selecting a topic for my MSc Engineering Investigation proposal. I would very much...

01 March 2021 7,396 4 View

What are the important topics in the field of Artificial Intelligence in Business world?

Dear All, I am doing my MS in Electronic Businesses. And I am interested in the AI field and its applications for businesses, its benefits, impacts, etc. What kind of scientific research dominate...

26 February 2021 8,816 6 View

What is the optimum time and temperature of blanching and pre-frying potato for frozen fries?

I am helping a local home industry for developing frozen fries from their local farm. I want to know what is the optimum blanching and pre-frying temperature and time for processing. Please also...

23 February 2021 1,616 5 View

Best excel chart to compare algorithms' running time?

Hi I want to compare the running time of robotic path planning algorithms. The grid size is 8X8. I have 100 scenarios of start and goal positions.. Each scenario is run in three obstacles ratio...

22 February 2021 621 1 View

Does the circuit modeling for planar monopole antennas using Foster canonical forms give good approximation?

Hi researchers, I am searching for some accurate way to do the circuit modeling of planar CPW-fed monopole antennas. I have gone through the literature where mostly circuit modeling is done using...

28 February 2021 7,016 1 View

Why cannot world and community leaders be gentle? Where did ethics of care go?

The whole world is in a mess and paused. We all are tired of seeing hypermasculinized and destructive leaderships all around us. This world has seen enough of the aggressive patriarchal social...

23 February 2021 292 7 View

How COVID-19 has affected mental health?

The pandemic has led to depression and anxiety and its negative effects shouldn't be ignored. However, it has also led some people to become more resilient! What do you think? Thank you.

21 February 2021 4,733 19 View

What is the most prevalent drug related problem in the developed countries?

Detecting the drug related problems is an important step in the pharmaceutical care plan

21 February 2021 5,421 3 View

Can medicinal plants really play an inherent rule in the COVID-19 tackle?

Numerous scientific reports cited plant extracts with potential antiviral activity and even anti-COVID-19? Why these findings are neglected? I remember very well the warning released by the WHO to...

17 February 2021 2,141 9 View

How can I interpret a ratio variable?

Dear colleagues, I am running a regression in which I have the following regression FoodExp = 67.04 DepRatio +.....e My interest is in the interpretation of the coefficient on the dependency...

16 February 2021 2,058 2 View

Can I simply dilute 25% NH3 solution to 10% solution by pouring water in tank and circulating with pump?

Is there any heat of dilution which I need to take care by putting some circulation cooler? Will there be any significant ammonia emission in the process?

09 February 2021 5,943 2 View

Patients with chronic kidney disease could get COVID-19 vaccine?

04 February 2021 278 4 View

Can anyone help to convert ODK XLS into XML?

We want to conduct a verbal autopsy using WHO adult VA updated tools in ODK. The current version of WHO adult verbal autopsy tools is v1.5.3. I have successfully converted VA ODK-XLS v1.4 into XML...

03 February 2021 844 2 View

Do have new reseach that you wish to publish a chapter on for free: Areas now Blockchain and cooperative computing?

03 February 2021 4,497 6 View