How to test gas production of organic system EDLC within charge-discharge process?

06 June 2013 1 9K Report

I would like to learn how to determine the gas production of EDLC in glove box and Ar enviroment.

And one more point: with CuCN you obtain a Cu-complex that behaves as an inorganic salt. The best reagent to decompose it is NaCN, if it's a problem, an excess of diethylenetriamine or similar polyamine works also.

Badges
Science topic

Similar topics
Physical Sciences
Energy

More Wu Yi Hsuan's questions See All

A potential trend of allegation (aggressive conclusion) rather than interesting findings or humble share (mild one)?

In master study and in my compulsory military service period, I've read (or perused) many works addressed as breakthrough or outstanding performance or pathway to this field with absolute...

31 December 2017 2,723 0 View

Is it critical to concern photoelectrode area with counter electrode one?

In photoelectrochemical water oxidation, some groups continually report promising performance with small exposed photoelectrode area (e.g. 0.2 cm^2). Is it critical to concern photoelectrode area...

01 February 2016 1,911 1 View

Is there any difference between p-n junction and non-p-n one?

According to Wang et. al. (Chem. Soc. Rev., 2014, 43, 5234--5244), the S–S heterojunction systems can be divided into two different types: p–n semiconductor heterojunction and non-p–n...

02 March 2015 874 3 View

(For PEC) How long would you rest an electrode in electrolyte to reach equilibrium?

For Photoelectrochemical cell, do you rest your target electrode in aqueous electrolyte for more than 10 min, no matter in dark or under illumination?

31 December 2014 4,740 3 View

Is it common that Pt continually splits water in electrochemical experiment?

In my case, I helped my colleague to do cyclic voltammetry in aqueous solution. I thought that it was simple, 0~1 V in 0.1M H2SO4 and polymer(carbon)/Ag/ITO provided by him as the electrode, but...

10 November 2014 9,708 7 View

Is it possible to form epoxide through this mechanism?

Seeing this mechanism from a waste paper in classroom. It seems like the final product is epoxide. Is this possible? I'm not sure what "E" means, but it is likely to be electric field.

09 October 2014 463 10 View

Any novel way to determine energy band gap from transmission and reflection of film?

I'd like to know if there is any way to determine energy band gap of film from transmission and reflection of it WITHOUT making Tauc plot.

08 September 2014 3,336 11 View

Is there any research that focus on influence of metallic ash on leakage current and/or gas evolution of EDLC?

Ash, especially metal and organic electrolyte.

07 August 2014 1,389 1 View

What does the minus value for each functional group mean in Boehm titration results?

We've made titration to check three kinds functional groups on carbon surface. However, sometimes I got minus value for amount of the functional group.

04 May 2013 2,295 0 View

Do functional-groups-rich carbons have a negative impact on electrochemical performance than less functional group containing ones?

What is the role of oxygen or nitrogen containing functional groups in supercapacitors or batteries?

03 April 2013 5,399 9 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

Basis set and input instruction to calculate HOMO and LUMO using Orca for Imidazolium based organic salts?

Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...

09 August 2024 5,444 7 View

How to develop investments in renewable energy sources?

08 August 2024 5,112 3 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

How to convert g/kg Humic acid dose to kg/ha?

I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?

02 August 2024 7,186 6 View

Is artifacts in XPS possible to build high deviation in binding energy larger than 5 eV??

Hello. Thanks for your consideration to see my question. Recently, I conducted XPS anaylsis of g-CN that is prepared from thermal polycondensation of DCDA, so-called conventional bulk-g-CN,...

30 July 2024 9,824 2 View

How to improve peaks separation in HPLC?

Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...

30 July 2024 435 3 View