On what basis I can select the machining parameters for determining tool wear during turning and drilling of AISI 304L with carbide tool.? Is there any data hand book available to select these parameters based on geometry of workpiece?
Cutting fluid used is vegetable based cutting fluids.
The range of cutting parameters for each particular cutting tool is provided in its related catalog. However, the mentioned range is general. Therefore, you should put the mentioned ranges as basis of your work for starting, then optimize it regarding your used material.
We need more information to sugest cutting conditions. For example, in turning testing, the hard metal insert is uncoated or coated? In the second case, what type of coating?
The drill is of integral hard metal, or have an brazed insert or the insert is fixed by an mechanical method? Coated or uncoated?
With this type information I can give you cutting parameter in more precise manner.
More details are needed
coated /uncoated tool,solid or insert type, etc are needed
We can easily select the parameters with the help of its related catalog, which means the wide range have been selected. Further, the range of parameters are easily decided by pilot experimentation.
Attach you have an excelent information about your necessity. Excuse me because is in spanish.
Carbide turning tool insert -- KC5010, with an advanced PVD AlTiN coating
Carbide drill bit -- Standard: DIN 338, Helix Angle: 300, Shank: Straight.
- Badges
- Science topic
- Similar topics
- Engineering
- Mechanical Engineering