How to reflect/characterise the heterogeneity of rocks in nano/micro scale?

10 October 2017 0 3K Report

As it said in title, currently I wanna simulate the impact of heterogeneity on the migration behaviour of rocks (shale, mud-stones) at the nano/micro scale using molecular dynamics methods, any suggestions of how to characterise the heterogeneity of rocks at nano/micro scale? Many thanks!

Badges
Science topic

Similar topics
Chemistry
Nanotechnology
Nano

More Ma Zhaoyang's questions See All

How to illustrate/characterize the deformation (e.g. plastic deformation) after the molecular dynamics simulation (post processing)?

I am currently studying the nanoindentation of solids; currently I can obtain the Young's modulus and hardness of the solid material. However, I wanna observer the deformation process (especially...

11 December 2018 2,635 2 View

Is the attached Rietveld refinement for silica done by TOPAS publishable?

Dear all, I have alpha-quartz powders and I did 3 hours XRD scan for these powders both at 30 degrees Celsius and 450 degrees Celsius (there exists no phase transformation at this temperature)....

06 July 2018 8,849 3 View

How to calculate the thermal expansion coefficient of each mineral in a mineral mixture using TOPAS software?

I want to get the thermal expansion coefficient of each mineral in a rock using high-tempearture X-ray diffraction (XRD); how can we achieve that using TOPAS software, since there will be peak...

04 May 2018 6,134 0 View

In rock engineering, what's the definition of void and what's the relationship between void and fracture?

In rock engineering, what's the definition of void and what's the relationship between void and fracture? For example, if I adopt molecular dynamics simulation to simulate the void in rocks...

02 March 2018 8,355 0 View

What's the relationship between molecular dynamics and lattice dynamics?

In order to gain the thermodynamics, elasticity, phase transitions properties, the molecular dynamics simulation of rock minerals (say crystalline mineral) can be performed and in this process,...

01 February 2018 7,506 3 View

How to generate animation movies using OVITO (scientific data visualization and analysis software for atomistic simulation models)?

How to generate animation movies using OVITO (scientific data visualization and analysis software for atomistic simulation models)? I already performed the molecular dynamics simulation of...

01 February 2018 5,092 3 View

As a new beginner, how to learn the software LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator) faster?

31 December 2017 2,954 0 View

How to characterize the degree of saturation in molecular dynamics simulation?

The impact of degree of saturation on the mechanical and transport properties of clay are still open at microscale, I want to know how to characterize/represent the degree of saturation in...

11 December 2017 886 2 View

What does chemical perturbation means?

I read one article and it refers "clays display a significant buffer effect with regard to chemical perturbations. The thickness of the clay that is chemically perturbed by the disposal facility...

11 December 2017 9,533 1 View

Any idea/suggestion about using molecular dynamics simulation about transport and geomechanical fate of proppants?

11 December 2017 989 3 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

Is there a classification scheme for rock cavities or caverns with respect to their size and shape?

The range of forms and sizes of cavities in rock is very big. Is there a classification scheme for rock cavities regarding their size and shape?

02 March 2021 4,511 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View