How to protect the electrical installations in the aircraft in case of lack of ferroresonance or other similar? (fault currents of high-frequency)
Dear Zeashan Khan,
Thank you for your answer. I undrestand, but how to protect the transformer in these cases. Do you have an idea about it?
Hi All I need to submit the camera-ready paper. Since, the conference requires that the camera-ready paper should be compatible with IEEE PDF eXplore, using PDF eXpress to obtain an IEEE...
08 September 2017 3,234 1 View
Hi all The dynamic response of the grounding electrodes subjected to such current pulses is predominantly influenced by same physical processes, which are related to the soil ionization in the...
11 December 2016 6,181 1 View
Hi all I'm looking for experimental results recently published of the transient behaviour of grounding system subjected to high-magnitude current (similar to lightning current). It will be better...
11 December 2016 2,719 0 View
Hi all Knowing that a good grounding system can dissipate the lightning current into the soil as fast as possible, thereby, reduce the potential rise and potential difference within the different...
10 November 2016 4,492 3 View
Hi All To obtain the solution of distribution current in the time domain, the Laplace transformer was performed and i have to apply the Cauchy Residue Theorem. Where this current is : ...
10 November 2016 9,828 2 View
Hi all Generally, the soil ionization has been found in the liquid and gas phases of the soil. For this purpose, is that this phenomenon exists for a very elevated resistivity ground where the...
10 November 2016 7,261 0 View
It was found in some research that the frequency dependence of soil parameters is accountable for affecting the grounding potential rise of electrodes. For this purpose, many models have been...
09 October 2016 5,968 3 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
I am planning to collect human fecal samples for metatranscriptomic analysis using MGI. These samples are from indigenous people living in a region with high temperatures. I will have access to a...
06 August 2024 1,367 3 View
Why is the molecule's orientation with an electric field affect polarizability? Electrons are diffuse enough to be independent with respect to orientation and effect of electric field on...
03 August 2024 7,843 1 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...
28 July 2024 6,553 1 View