Why the nucleic acid gel melted after running for 30min?

Hi all, I proceed with nucleic acid gel electrophoresis recently several times, but a wried phenomenon is they always melted after running over 30min. My gel concentration is 1% percentage...

22 February 2021 9,896 3 View

During transformation of Agrobacteriumu with plasmids ,PCR Positive colonies are not POSITIVE after restreaking.. Why?

Initially we are getting positive amplification .The positive colonies are selected and restreaked.The PCR is not showing positive amplification.

18 December 2020 9,802 3 View

How to calculate trapping parameter of the deconvolution peaks?

28 July 2020 2,413 2 View

Have any professors ever done research about the expression of fusion proteins in Drosophila S2 cells?

1. How to scale up the expression of fusion proteins? 2. How to improve the purity of fusion protein to 90%? I have tried affinity chromatography, but the purity by SDS-PAGE was not satisfied....

04 November 2019 8,479 6 View

How to calculate the active area of CNTs modified glassy carbon electrode?

"The active area of so porous electrode as the authors used could not be correctly evaluated using the Randles-SEVCIK formula. Just because the depletion layers of active places may overlap." How...

28 October 2019 1,782 3 View

Future of bioinformatic analysis in plant science ?

please share your idea regarding the future of bioinformatic analysis in plant science? recommend the preferred PC and MAC programs for the beginner ,and for the advanced users? as well as any...

24 October 2019 8,814 4 View

Raman cross section?

Can anyone help me to calculate Raman cross section in RE doped glasses?

12 December 2018 6,330 1 View

Which is the best kit/enzymatic method Efficient for the isolation of cells from the mouse or human tumors?

I want to isolate the cells from the tumors (mouse model and human). I read that Collagenase I is harsher than Collagenase IV. Can anyone please suggest if there is any commercial kit with the...

08 August 2018 4,961 2 View

Hi Everyone, can anyone tell how to get growth kinetics of bacteria with the help of Hoechst stain??

Hoechst 33258 stain

15 May 2018 3,128 3 View

Can any one give Jcpds fileof ZnSe and CdZnSe?

i have obtained an additional peak in XRD at 31.7 degree. so i want to get the idea about this peak few articles mentioned it but not showing angle values.

29 November 2017 3,772 3 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

How can we simulate an hyperelastic-viscoelastic behavor with Ansys APDL?

I am working on modeling and simulation of biomecanical material behaviour, I have succeded on simulating skin using anisotropic hyperelastic material, on APDL and in our lab's finite element...

28 February 2021 552 3 View

How to compare 2 samples recruited with different sampling methods?

If I want to compare characteristics of 2 groups of patients, one group is recruited from a random sample of the general public while another group is from a sample with a fixed gender (male to...

26 February 2021 3,526 3 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

Can anyone share his experience regards Smoothing in origin?

I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...

26 February 2021 8,183 3 View