How to model Bipolar membrane electrodialysis on Aspen Custom modeler?

10 March 2022 0 9K Report

Hello,

I need to model BPMED on Aspen, but I have no idea how to do this. I can't model the BPMED reactor directly on Aspen Plus i have to use ACM but I've never used it! Does anyone know how to ?

Thanks :)

Badges
Science topic

Similar topics
Chemistry
Chemicals
Solvents

Aspen Plus Simulation?

Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...

06 August 2024 5,023 1 View

How can I add own Henry coefficients in Aspen Plus?

Hi, i would like to simulate an absorption process in Aspen Plus. I want to use the NRTL model und would like to add some individual Henry coefficients. Is that possible and how?

05 August 2024 2,333 2 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

I heve some problems in simulating 1,3 Butadiene extraction with NMP(by BASF) CAN ANYONE help me?

I am currently simulating the extraction of 1,3-butadiene using NMP solvent (BASF) in Aspen Plus. I am encountering difficulties when entering values for the binary parameters. I have referred to...

01 July 2024 7,069 0 View

How to get the standard free energy of formation (DGFORM) for AIR in Aspen Plus ?

01 July 2024 8,134 3 View

Any Green Solvents to dissolve PET near room temperature?

I need a PET + Solvent mixture to feed it to a fixed bed reactor for steam reforming.

30 June 2024 2,122 2 View

Aspen Adsorption linking to MATLab ??

Hi, I am looking to link MATLAB to Aspen Adsorption. I know that for Aspen Plus, it is possible to use actxserver(). Does anyone know if the same method can be used for Aspen Adsorption as well?...

20 June 2024 8,338 2 View

Given, ER = 0.2, WHAT WILL BE THE AIR FLOW RATE IN kg/hr?

I have a biomass with given ultimate and proximate analysis data. I am using Aspen plus for the simulation of gasification of biomass. In experimental data the gasifying agent air flow rate is...

18 June 2024 2,743 1 View

How to run Activated Sludge Model (ADM1) in Aquasim software?

I am trying to model a sequencing batch reactor using ASM1 in aquasim. I started from scratch create variables and processes but it doesn't work as I expected. How can I find the ASM1 package...

17 June 2024 4,466 1 View

What are the approximate quantities of Ni/Al₂O₃ and Cu/ZnO/Al₂O₃ catalysts required to produce 2095 tons of methanol per day?

A methanol production process combines tri-reforming of methane (TRM) with water electrolysis to utilize CO₂. The TRM reactor uses a Ni/Al₂O₃ catalyst, and the methanol synthesis reactor uses a...

10 June 2024 2,105 1 View