How to measure intensity of input or output port port using RSOFT?

More Tamer Saleh's questions See All

What are the quantum dot light source properties?

Dear all I want to know the quantum dot light source properties,; especially which concerned to the phase shift and operating wavelength. Is it suitable for photonic crystal applications?...

02 March 2018 1,448 0 View

Is Rsoft software manipulate structures with multi input? if yes how to make more than one source?

03 April 2017 6,219 0 View

I will start to search on the field of DNA sensors, I want advice of a good reference (book or paper) to start on this field.

About my question: 1- I want good book or paper. 2- Good simulation program 3- A brief definitions about terminology in this field. 4- What knowledge I should know. Thanks

06 July 2016 5,133 2 View

I am use OptiFDTD simulator, What is the good conditions should I take before run my structure?

We I should take in my consideration to get right results such as: 1- The location and the type of the source. 2- The number of PML layers. 3- The reflectance of the PML. 4- The mesh size. And any...

06 July 2016 1,568 5 View

I want to use Lumerical FDTD to study photonic crystal optical logic gates, can any one help me with an example?

I want to use Lumerical FDTD to study photonic crystal optical logic gates, can any one help me with an example? If CST or COMSOL can help me please help me

11 December 2015 3,524 3 View

Problems about acousto-optic coupling in Comsol, how to check whether the moving mesh is correct?

I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...

13 August 2024 9,795 0 View

GC-MS retention index prediticon?

Hello experts, Does anyone know any free software about retention index prediction ?

08 August 2024 7,403 2 View

Can anyone provide me with molecular docking softwares/ websites?

Molecular docking software/ websites?

02 August 2024 8,704 7 View

Can a Conventional 50W visible LED Lamp Emit UV Light?

I'm researching light sources and their UV emissions. I'm curious if a 50W, 7500K conventional LED lamp emits any UV light. I found that a 200W tungsten lamp can emit up to 1.5 mW/cm² at 350 nm....

31 July 2024 3,843 7 View

Does the delta function actually make sense to use on point particles?

The delta function seems produce logical contradictions when analyzed on a fundamental level. I would be curious if anyone else agrees.

31 July 2024 10,109 3 View

I am working on my Master's thesis on the biogeography of the genus Ruagea and I would like to ask, could someone help me to check whether my result?

I created a file with my outgroup and ingroup species using Beauti, ran it in BEAST, viewed it in Tracer, and then used TreeAnnotator to create a file that I imported into RASP. Could someone...

28 July 2024 2,979 1 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

Which software tools are best for enhancing diagnostic accuracy in chest X-ray imaging using image reconstruction and neural networks?

I am reaching out to seek your valuable advice and recommendations regarding the best software tools to use for this research. Specifically, I am looking for software with a user-friendly...

22 July 2024 3,794 1 View

How to test multivariate outlier in STATA?

Hey all, I need help testing for multivariate outliers using STATA for my master thesis. The literature recommends the Minimum Covariance Determinant (MCD) (Verardi & Dehon, 2010). I found the...

22 July 2024 8,821 2 View

Using a large amount of data, such as 30 years of daily data, in a machine learning model like LSTM can reduce the model predictivity?

I have used 30 years of daily data, but the model is not able to optimize, getting just 0.57 in NSE and R2. when I reduced the data to 20 years in daily time frame I got 0.73 in NSE, R2 for both...

22 July 2024 669 0 View

Tamer Saleh

Thank you sir,

But till now I want to ask about the tool. For more explanation I used to operate with Fullwave (from RSOFT) and dealing with all optical logic gates using photonic crystal.

Maryvonne Chalony

If I am right you are talking about S-Matrix calculation. This is a feature available since the latest release of RSoft :

FullWAVE (as BeamPROP or ModePROP) can generate the S Matrix of passive components. It can be applied to Photonic cristal application...

https://www.synopsys.com/content/dam/synopsys/optical/pdf/RSoft-Photonic-Component-Design-Suite.pdf

I hope this helps!