How to enhance the strength and joint efficiency of friction stir welded Acrylonitrile Butadiene Styrene (ABS) and Polycarbonate (PC dissimilar joint?

09 April 2018 1 6K Report

I have obtained a joint efficiency of near about 62% in FSWed dissimilar Acrylonitrile Butadiene Styrene (ABS) and Polycarbonate (PC) butt joint by varying the process parameters. How can the enhancement of joint strength can be achieved apart from varying the process parameters?

Kadhim K. Resan

you can adding the powder between two plate of dissimilar

Badges
Science topic

More Sudhir Kumar's questions See All

What is the relationship between the threshold voltage and the device's noise performance, particularly in terms of flicker noise and thermal noise?

The threshold voltage (Vth) of a MOS device plays a crucial role for its operation. At the same time, noise is an intrinsic factor. So how noise (flicker or thermal) change with the change in...

29 July 2024 3,246 0 View

Why methanol and sulphuric acid used in the analysis of polyhydroxyalkanoates (PHA) by GC-MS?

Why methanol and sulphuric acid, used in the analysis of polyhydroxyalkanoates (PHA) methyl esters by GC-MS? Additionally, why do we typically use non-polar solvents in GC-MS?

22 July 2024 1,210 2 View

What is the solvent system required to run tlc for calixarenes?

If you don't understand my question let me know

21 July 2024 563 1 View

Sample size for qualitative study?

I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...

20 July 2024 9,153 11 View

How to convert available phosphorus to total phosphorus?

I need to convert Available phosphorus into total phosphorus

18 July 2024 6,799 3 View

Can it is possible to find the cleaved sequence when a protein cleaved by a heamaglutanin protease (HA/P) by any bioinformatics tools?

Bioinformatics tools like peptide cutter

15 July 2024 6,453 1 View

Can we progress towards defining obesity based on body fat content?

The burden of obesity is enormous. The greater challenge lies in accurately diagnosing obesity at the right time, reflecting the true increase in visceral fat. BMI may not accurately represent...

14 July 2024 8,771 4 View

How does high humidity affect the growth and development of crops?

10 July 2024 7,258 20 View

In what ways does high humidity impact the pollination process in agricultural plants?

10 July 2024 7,513 13 View

Do the parts of the body that are situated at a longer distance from the central nervous system have the least control & coordination comparatively?

What would be the effect of distance from CNC cum Heart on the structure and function of a particular part of the human body? Do short people have evolutionary advantages to control body parts in...

09 July 2024 2,052 3 View

Could you recommend some articles on Urban Transportation System optimization and Innovation?

13 August 2024 2,595 3 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

A Question about Phd thesis?

Hello everyone What is your opinion about the introduction of an expert decision support system in which the rules are extracted from existing data without human intervention, instead of being...

31 July 2024 5,785 4 View

After a lot of feature engineering for CTR modeling, it feels like it's basically the end of iteration? I mean, it's not cost-effective to keep doing?

After a lot of feature engineering for click-through rate modeling, it feels like it's basically the end of iteration? I mean, it's not cost-effective to keep doing it?

29 July 2024 4,955 0 View

How to use Desmond in HPC ?

Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...

28 July 2024 6,553 1 View

How should operational parameters be selected when developing a pore-free laser welding technology?

There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...

27 July 2024 7,168 2 View

I ask Chinese seismologists to inform me: who should I contact to create a joint Forecast Center?

I ask Chinese seismologists to inform me: who should I contact to create a joint Forecast Center? I do not hide that the beginning of my work was connected with the successful forecast of the...

22 July 2024 2,276 1 View

Look for qualified candidates of Visiting Scholars to Southwest Jiaotong University?

We invite qualified candidates of Visiting Scholars to engage in research collaboration or deliver lectures on their research, with travel expenses covered. The visiting period is flexible,...

20 July 2024 1,165 1 View

How to combat antibiotic resistance?

The increasing resistance of bacteria to antibiotics has made many infections difficult to treat, posing not only a threat to public health but also a major challenge to healthcare systems worldwide.

18 July 2024 6,688 3 View

How to prepare bacterial conditioned media to study the effect of bacterial secretome?

I would like to investigate the effect of bacterial secretome on cancer cells. How do you prepare conditioned media from bacteria?? conditions- time points - media I am looking for the best way...

17 July 2024 3,785 9 View