What about the Graphitc carbon nitirde with nanocomposite role in the energy application?

08 September 2017 1,872 0 View

What is the reason of Jsc increasing some cases? what is is the mass transfort limitations?

Pt electrode you cannot reach the stable photocurrent! The current is increasing all the way to JSC! (It can be a sign of mass transport limitations)

11 December 2016 5,659 1 View

Which method for best for graphene synthesis fro R&D purpose?

We have planned for synthesis Graphene which method efficient for synthesis and easy method

04 May 2015 8,972 3 View

How to Prepare WO2 for EIS(NYQUIST AND BODE) STUDEIS and Cyclic voltametry?

I have bought new Electro chemical work station, i want to know how to make WO2 sample preparation for Cyclic voltametry and nyquist and bode plots. we have three electrodes. glassy carbon -...

01 February 2015 8,090 2 View

How can I dissolve PdCl2?

11 December 2014 2,439 6 View

,what is scientific meaning explain this results can you send any article based this results?

grain size increase --- strain and dislocation density reduce what is the reason? Crystallite size increases but dislocation density and strain value reduces

11 December 2014 4,970 0 View

How can one calculate strain and stress from an XRD graph?

I have XRD pattern and already I have calculated particle size but now I want calculate strain and stress. How should I calculate it?

10 November 2014 8,624 8 View

Is there any possible way to obtain different nanostructures except hydrothermal method?

I have used hydrothermal method for different nanostructures synthesis but any method available to synthesis different nanostructures.

01 January 1970 5,422 8 View

What is the exact reason crystal size small despite of the sem shows big faceted paprticles?

The question is why we have very small crystal size in XRD but in SEM we can observe big faceted crystals, For example perhaps the faceted particles may not be single crystal?

01 January 1970 6,330 4 View

How the precursor materials during the synthesis procedure is responsible for nanofiber type of structural characteristics?

I used VOCl3 , Ethanol and urea as precursor materials and during synthesis procedure 800 degree, 1100 degree at N2 atmosphere. Final product obtained Vo, VN, VC nanofibers. let me know , How the...

01 January 1970 7,475 1 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Does Napabucasin soluble in dichloromethane and in ethanol?

I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...

02 March 2021 9,945 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View