How to determine median contour from 3D IDA Curve?

Punashri Prakash Phadnis @Punashri-Phadnis

24 August 2024 0 3K Report

In Chapter 6 of the enclosed file, 3D IDA curves are generated. After that, 3D IDA surface and median contours are developed. How to determine the median contour from a 3D IDA Curve?

Badges
Science topic

Similar topics
Mathematical Sciences
Graphs

More Punashri Prakash Phadnis's questions See All

How to generate 3D surface in Origin pro?

I have generated a 3D scatter plot for a 3D IDA curve. (Similar to Fig. 15 of Vamastikos' research paper enclosed here). Now I want to develop a 3D surface for the median of IDA. How to develop a...

04 February 2024 3,201 0 View

How much strength should be gain by concrete of M35 grade with PPC after 7days of water curing?

Due to PPC, the strength gain of concrete is slower at the early stages. While OPC should gain strength of 65% of 28 days strength at the end of 7 days. Whether 45-50% strength is gained by PPC...

06 November 2023 1,347 3 View

How to represent strength and stiffness in time history dynamic analysis for the structure?

I have performed a fragility analysis based on Incremental dynamic analysis for the Bare frame and open ground storey frame and full infill frame. I sent the manuscript to Springer...

06 May 2023 9,025 2 View

How infill detrimentally adds to the stiffness of the structure, even it is not ductile?

It is conjectured that the infilled frames performed better. How such an unfavourable element (infill) which detrimentally adds to the stiffness of the structure and causes the absorption of more...

02 May 2023 1,144 2 View

How much default tensile strength of concrete is considered in SAP2000?

In SAP2000, in material properties mander stress-strain curves are added by default for unconfined and confined conditions. How much default tensile strength of concrete is considered in SAP2000...

06 March 2023 6,941 2 View

Why the minimum column width of 6inch is not specified by design codes?

Indian Standard design code specified minimum width of column as 9 inch but many G+2 structures are built with column of width 6 inch and these structures withstand the load safely. If anybody is...

07 June 2022 2,693 0 View

How to perform logistic regression analysis to obtain reliability of the structure?

I have performed Incremental Dynamic Analysis on the structure by applying considering ten-time histories from PEER database. Regression analysis requires data in terms of collapse and...

06 November 2020 6,298 2 View

Why triangular shape beams are not provided in RCC?

In steel structure we may use a triangular shape of beam, (in truss, railway for station truss) but not in RCC or in concrete structure.

19 August 2019 9,023 2 View

Why the combination of Na2O and K2O? Is Na2O or K2O alone is sufficient? Why the factor 0.658 is used?

In IS 269, Table 2, note 1, it has been prescribed that, the alkali content should be expressed as sodium oxide (Na2O + 0.658 K2O). Kindly clarify the following points: 1. Is the conversion is...

17 August 2019 3,564 4 View

How to determine P-M interaction in vertical steel section encased composite shear wall?

My research interest is Steel-concrete composite shear wall.

05 August 2019 8,797 5 View

How do I replace a file with a more recent version of a paper that was uploaded to ResearchGate?

The paper in question is "Interpolation of Nitrogen Fertilizer Use in Canada from Fertilizer Use Surveys". This paper was very recently published by Agronomy (MDPI). Agronomy has, in the last day...

07 August 2024 9,934 3 View

How to solve g_mmpbsa error?

Program: g_mmpbsa, version 2024.1 Source file: extrn_apbs.cxx (line 152) Fatal error: Failed to execute command: $APBS pybYcUWA.in --output-file=pybYcUW.out

07 August 2024 6,066 0 View

How do you delete a duplicate pdf for the same paper on ResearchGate?

The first pdf file I uploaded had an error. So I uploaded an updated, corrected pdf of that paper with a different pdf name. I dpon't want the old copy to be download or read.

07 August 2024 9,508 1 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

AUX gas reading problem on QE with full MS and PRM method in one run?

Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...

06 August 2024 4,953 0 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

JCPDS 65-7246 file please?

Dear Researchers Kindly share JCPDS 65-7246 file Thanks in advance

04 August 2024 5,613 1 View

Dirty and clean?

Hi everyone I need a file with a dirty and clean potato image

04 August 2024 7,199 4 View

How to change the version of the article full-text pdf file?

How to change the displayed full article text to its corrected version? In the file on the page of the journal where I published the article, there was an error in the text, the table is...

30 July 2024 3,229 2 View

Difficulty with permittivitt and Magnetic Permeability Calculations?

Difficulty with permittivitt and Magnetic Permeability Calculations Hello everyone, I have all the parameters related to the calculations of the permittivitty and magnetic permeability...

30 July 2024 5,206 1 View