How to create fluid properties parametric table for Ammonia-water mixture in EES?

More Pooria Pirdavari's questions See All

Negative Temperature in welding simulation in Abaqus !?

I'm working on a fusion welding model in Abaqus 6.14. In my model surrounding temperature (predefined temp.) equals 25 C; But when I run it, it shows an unexpected decrease in temperature, making...

12 September 2020 7,395 4 View

Why Mean Absolute Percentage error is too high?

I would like to make a comparison on the performance of some regression algorithms according to different performance criteria, including Root Mean squared Error (RMSE), coefficient of...

10 July 2020 5,463 7 View

Where can I find thermal properties of Polyfin Paraffin wax?

Hello everyone, I am trying to model the melting process of a paraffin wax named "Polyfin" in Ansys Fluent. In order to do this, I need to define the thermal properties of Polyfin to fluent,...

30 June 2019 6,028 3 View

How to find dynamic coefficient of bearing or seal with Ansys CFX?

Hi everybody In order to rotordynamic analysis at first we solve Reynolds equation (also perturbed Reynolds equation) to find the pressure distribution and consequently we determine the stiffness...

24 December 2018 5,549 3 View

Is there any open software available for molecular dynamics in presence of "electric field"?

Is there any open software available for molecular dynamics in presence of "electric field"? In addition, I want to add some conducive three dimensional shapes around the molecule. Thanks for...

17 January 2018 5,329 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

What is the characteristic length to determine the Reynolds number for the scattered turbulent fluid flow?

Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...

02 March 2021 1,999 5 View

Can we distinguish the type of free fluid inside the pelvic and abdominal cavities whether blood or serous fluid using the ultrasound?

during ultrasound examination of acute abdomen, sometimes we see free fluid , can we know the type of fluid ,whether blood or not , using ultrasound only? if yes , what are the sonographic...

01 March 2021 7,476 4 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Is the a way to contol flow (Flow velocity) without impacting pressure value?

I have a pipe with 10 mm in Diameter and 2 bar pressure, the fluid velocity is 200 m/s, the fluid is air. is there a way to reduce velocity without affecting the pressure value?

25 February 2021 7,187 3 View

Md Washim Akram

It may help you.

Ali Benhmidene

thanks for your very interesting doc. dear @ Md. Washim Akram

Pooria Pirdavari

@Md. Washim Akram thank you so much for your answer. I've seen these correlations for Ammonia-water thermodynamic properties before but I just want to use EES to calculate these properties.

@ Mamdouh El Haj Assad thank you so much I will check it out.

Olusola Bamisile

@ Mamdouh El Haj Assad, Please can you help me with the specific name of the book or send me an electronic copy via [email protected]. Thanks sir