Essential oil, micro gram , micro litre
Weight in microgram= density in gram/cm3 x volume in microliter x 0.001
I used Type169 for data exchange between Python and TRNSYS. Unfortunately, facing the following error. No proper documentation is available for this part. TRNSYS Message 105: A TYPE was called in...
14 February 2021 5,577 1 View
Can Amine (such as Et3N) be used as solvent as well as base for the Sonogashira Coupling? How to decide the amount of solvent to be used in any reaction? Does the amount of solvent affect the...
14 February 2021 4,018 3 View
I'm working on gram negative i want to use any natural extract (plant extract) or triple drug combination against its biofilm formation.
14 February 2021 1,403 3 View
I'm a new siesta learner, I'm working on lithium-ion batteries, I have calculated adsorption energy but i am not able to calculate diffusion barrier of Li ion. kindly help me how to calculate...
14 January 2021 2,688 1 View
Suggest some good journals having Impact factor more than 3 which is not an open access one for alternative and complimentary medicine?
11 January 2021 7,782 1 View
In alkaline lysis solution3 acetic acid should be used to adjust pH according to protocol. Can I use hcl instead of glacial acetic acid? Will there be any change in composition of solution?
08 January 2021 7,764 3 View
I want to extract plasmid dna from bacterial culture guide me what will be the most appropriate method.
05 January 2021 1,118 14 View
I want to promote peace and non-violence in school and collaborate for such initiative in future.
30 December 2020 973 3 View
Super austenitic stainless steel castings showed liquation crack after liquid penetrant testing post heat treatment. How to reduce this in thick walled castings.
26 December 2020 7,959 3 View
We have currently extruded Magnesium alloy AZ61A into Rods of 9.5mm diameter and are aiming to cold draw them to smaller sizes of 9mm, 4.5mm and 3mm. Can someone outline the cold drawing process...
24 November 2020 5,689 2 View
Biodiesels derived from waste vegetable oil transesterification with Ethanol (FAEE) show higher peroxide values than those derived by transesterification with methanol (FAME) prepared under the...
13 February 2021 193 6 View
Hello everyone, Does anybody know if phenolic plant extracts such as tannins dissolved in water can interact with silicone oil? (although silicone oil and water are immiscible).
03 February 2021 5,656 2 View
For research purposes, it is required to have optically clear, low viscosity silicone oil with a refractive index of 1.5-1.4. It is going to be used in optoelectronic research. Online purchase is...
01 February 2021 9,160 3 View
Injected an oil having a concentration of 832mg/ml and found a flat top peak and was not able to quantify. How to resolve this problem?
20 January 2021 8,461 3 View
Hello everyone, I have maybe a stupid question regarding the right packaging to use when comes to send some oil samples in external labs. Do you have any advice about that? Is there a risk that...
18 January 2021 7,826 4 View
What is the thimble in estimating sediment of oils?
03 January 2021 4,379 1 View
I have Agilent GC-MS and need to analysis essential oils which column will be applied for their analysis
30 December 2020 4,811 2 View
I'm not sure the steps to treat wastewater containing mixture of alcohol solvent, oils and glycerol. do we neet to separate before further treatment.
27 December 2020 6,058 6 View
Does anyone have any experience of room temperature degradation of silicone oil to silica in presence of acids?
26 December 2020 1,275 4 View
If we extract the essential oil from a medicinal plant i.e., Ajwain seeds by hydro-distillation technique, it will yield about 2-3% essential oil. My question is about the remaining 97-98% portion...
16 December 2020 5,561 6 View