How to configure Weka with Netbeans and how to work on algorithms built-in with weka?

More Sonam Seth's questions See All

How to form the state space model of SMIB with Power Electronic Load?

I am working on a small signal stability analysis of a power system on a power electronic load. The power electronic load is modeled as a voltage-dependent load and has the relation attached in...

26 June 2024 2,496 1 View

How can we model Power Electronic Load for carrying out small signal stability analysis?

Currently, I am working on modeling power electronic loads to perform small signal stability analysis. Anyone researching the same area can help me, as there is limited literature on this area. Or...

16 May 2024 5,468 2 View

Any thoughts on troubleshooting my CC9 KO experiment?

Hi, I'm currently trying to generate a one-vector plasmid system for a knockout using CRISPR/Cas9. I'm using lentiCRISPRv2 (ampicillin-resistant) and following the GeCKO Target Guide Sequence...

29 April 2024 3,660 0 View

What is the Impact of empowering an inquiring mind in a classroom?

History of what lead to this thinking Current issues and debates around this paradigm

01 April 2024 459 0 View

Why oscillation frequency less than 1 Hz is termed as inter-area mode and frequency between 1 -2 Hz is termed as local mode of oscillation?

mode of oscillation is classified as stated in the question. I would be grateful if someone can share the literature about it.

17 March 2024 1,846 2 View

How can I measure signal intensity of Hoffa's fat pad?

I want to examine the correlation between signal intensity of Hoffa's fat pad and KL grades of knee osteoarthritis. But i am not able to get how to measure the signal intensity. Elliptical/round...

11 March 2024 9,693 1 View

Respected members! Can someone please suggest me radiology related topics to write a review article?

If any respected member want to share the work with me.. i am ready.

20 February 2024 4,189 8 View

Oscillation frequency of induction motor load in power system stability studies?

Hi, I am carrying out a small signal stability analysis of a power system with an induction motor (squirrel cage) as the load. I am interested in investigating the frequency of oscillation and...

11 February 2024 3,583 0 View

Why number of states does not get reduced when power system stabilizer is deleted from the Model developed in MATLAB/Simulink?

I am working on the small-signal stability of the SMIB system. I want to find the oscillation frequency and damping ratio without and with the power system stabilizer. When I removed the PSS from...

07 February 2024 1,401 0 View

How to separate symetrical diselenide and selenide from a reaction mixture?

I want to get pure diselenide substrate but in the rxn mixture both selenides and diselenides are forming. and both have the same retaintion factor value. so, I am not able to separate it through...

20 October 2023 898 3 View

Absorption coefficient of methane?

Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?

06 August 2024 980 5 View

How to determine method detection limit in an analytical method?

I know the difference between instrumental LOD and method LOD but my query is - in case of any sample whose concentration is zero or not detected by the instrumental LOD, is it possible to get...

24 July 2024 6,592 5 View

How to determine LOD values?

I am performing fluorescence experiments using a ligand to detect metal ions. I want to determine the Lowest Detection Limit (LOD) using the formula LOD = 3σ / K. However, I'm uncertain about...

19 July 2024 1,086 1 View

Can any of you suggest how to find the detection limit.?

I am working on flourescence sensing of heavy metals using quantum dots.Can any of you suggest how to find the detection limit. Whether it is calculated from formula or we can get from instrument?

19 July 2024 7,411 3 View

Which is the best approach for anomaly detection in scanned image data set?

Anomaly detection in scanned image data set

18 July 2024 3,578 3 View

How to label synapses in over-fixed mice brain sections (40 um) via immunohistochemistry (IHC)?

We have mice brains that were over-fixed due to old PFA used during perfusion. Thus, the synapses are no longer being labeled by the Synaptophysin (SY38) mAB. which works perfectly every other...

17 July 2024 7,767 3 View

How do you decide an optimal AC amplitude for non-faradaic electrochemical impedance spectroscopy?

I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...

16 July 2024 5,031 1 View

Why flow rate of MFC for pure NH3 gas decreases with time?

We have been using MFC to control the flow rate of pure ammonia gas. The MFC is placed in an oven at 50 deg. C to avoid blockage due to NH3. However, after a few days of usage, the MFC is unable...

11 July 2024 5,796 1 View

What are the criteria that must be retained for the development and validation of a qualitative NMR method ?

Dear Community, I would like to develop and validate a qualitative NMR method for the analysis of a specific category of chemicals, and my question is the following: What are the criteria that I...

08 July 2024 1,402 4 View

Two PhD and One Master to expand R&D team, anyone interested?

Hi all, if you are looking for PhD and Master opportunity to work on Microalgae research and Biosensor for bacteria detection. Please do not hesitate to email me [email protected]

07 July 2024 7,576 0 View

Robbi Rahim

first you could look at add in that support weka to netbeans

Himadri Nath Saha

https://edumine.wordpress.com/2015/04/26/how-to-compile-and-execute-weka-source-code-on-your-computer-part-1/

http://machinelearningmastery.com/how-to-run-your-first-classifier-in-weka/

Sonam Seth

Thank you Himadri Sir

Muhammad Umarfarooq

Thanks Himadri Nath Saha