Here are the steps on how to perform a pushover analysis on a simple frame in Abaqus with displacement control to a node on the roof:

• Create a model of the frame in Abaqus.
• Apply a uniform load to one side of the frame along its height.
• Define a displacement control on a node on the roof on point of interest
• Run the analysis.

Here are the detailed steps for each of the above steps:

• To create a model of the frame in Abaqus, you can use the built-in tools or import a CAD model. Once the model is created, you need to define the material properties and boundary conditions.
• To apply a uniform load to one side of the frame along its height, you can use the "Pressure Load" option. The load should be applied to the face of the frame that is opposite the side where the displacement control will be applied.
• To define a displacement control on a node on the roof, you can use the "Displacement" boundary conditions. The displacement should be applied in the horizontal direction.
• To run the analysis, you need to click on the submit job after a successful data check.

Once the analysis is complete, you can view the results in the Abaqus Viewer. The results will include the displacement of the roof node, as well as the forces and moments in the frame members.

If you need guidance, feel free to reach out to me on WhatsApp https://wa.me/+923440907874. While I may not be able to provide physical assistance, I can certainly offer guidance and support for your project.

Thank you so much Tufail for the information and sharing your whatsapp. Your answer helped a lot.