Dear all,
Is there a way to access volume of an integration point in ABAQUS UMAT. I need that information for the non-local regularisation I wish to implement.
Thanks in advance,
with regards,
Hansini
Hi, I am using ABAQUS for soil consolidation analysis. Could anyone tell me whether there is a way to access pore pressure at gauss points (from UMAT) Thanks, with regards, Hansini
05 June 2017 10,016 2 View
Dear all, I am doing a plain strain consolidation analysis in ABAQUS. I know ABAQUS take compressive stress negative which is opposite to the sign convention used in soil mechanics. I want to...
03 April 2017 7,358 1 View
Hi, I am using ABAQUS UMAT to implement a constitutive model. I am trying to implement a non-local softening variable within my model. From UMAT I can only access to stresses and state variables...
31 December 2016 4,116 4 View
Hi, I am trying to model plain strain biaxial compression test for dense sand with ABAQUS Standard, I have implemented a critical state soil model in forms of UMAT. Well, as expected for dense...
10 November 2016 3,393 4 View
Hi, I am trying to model a simple shear test in plain strain conditions in ABAQUS. I initially did a single element model. But when I try with multiple elements, I encountered some problems with...
09 October 2016 6,911 12 View
Dear all, I have a very basic problem regarding how abaqus calculate reaction forces of nodes with displacement boundary conditions. I am analysing a vertical anchor plate buried in sand. The...
11 December 2015 813 3 View
Dear all, I have a very basic problem regarding how abaqus calculate reaction forces, nodal forces and contact forces at nodes with displacement boundary conditions. I am analysing a vertical...
11 December 2015 6,870 4 View
I have input a moment load in module load Abaqus, i put my moment load on the node surface (using reference point). I have define moment in history output and make a set for moment too. But the...
08 August 2024 4,831 4 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
Because I have realized that the world tends more and more to do open and free science and there is a trend more and more to choose free databases, free tools and open access platforms.
01 August 2024 10,046 1 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...
28 July 2024 8,169 0 View
hi, I am doing a risk analysis of a cylindrical fuselage with windows. I have applied contact interactions between the different parts, and I have applied a unit value load to a reference point,...
20 July 2024 647 2 View
Hi all, I am using the element deletion process based on a Tsai-Wu criterion through a UMAT with a specific State Value controlling the process (DepVar -> Variable number controlling element...
17 July 2024 1,501 1 View