11 November 2017 5 6K Report

Hello,

I am searching infos on WBG semiconductors and often the cost is put in advantage or disadvantage. It appears really difficult to find this information that some of you may have.

Thanks a lot

Adrien

Similar questions and discussions
What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

How the Ground Plane implantation is performed without damaging (and w/o varying the undoped nature) the top Si (8-10 nm) in FDSOI technology ?

It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...

24 February 2021 5,974 4 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

How to call both UMAT and UEL together in Abaqus?

I have a model with bulk material (matrix) and inclusions and cohesive interface elements between both. For the bulk material, I have implemented a UMAT and for the cohesive interface elements, I...

20 February 2021 1,286 2 View

How can we determine the band gap of a composite material that is made up of a composition of direct and indirect band gap semiconductor materials?

I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...

17 February 2021 8,104 4 View

Measurement of water retention in organic substrates without a pressure plate?

Hello, I'm trying to measure the physical and hydrological properties of organic substrate media. Currently, I'm referring The book Soil sampling and Methods of Analysis by Carter and Gregorich....

09 February 2021 3,233 8 View

What is the best supplyer for high quality lithium niobate?

Hi, I want the use lithium niobate for the frequency conversion from 1030nm to 515nm. We want to order bulk material and machine it to the required dimensions. There are numerous suppliers of...

07 February 2021 6,786 2 View

What is the best way to improve the working potential window of a solid electrolyte?

My solid polymer electrolyte shows low bulk resistance show quite a low bulk resistance. However, the potential window (obtained from LVS) is very small. Please how can I improve the operating...

31 January 2021 3,340 9 View

How to prepare an algal sample for FT-IR spectroscopy?

Can we measure the bulk composition of biomolecules present within an algal sample directly by placing its powdered form on a FT-IR spectroscopy stage? Or does it require a particular kind of...

30 January 2021 2,303 4 View

What are the merits and demerits of GAN and classical data augmentation in plant leaf disease detection and classification systems?

anyone suggest what are the merits and demerits of GAN and classical data augmentation in plant leaf disease detection and classification systems

21 January 2021 5,135 5 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close