design and manufacture composite any one used to make advance hand lay up method
Several different techniques are currently used for manufacturing the composites. Hand lay-up is a common technique to prepare fiber composites. Besides that, compression molding, infusion, resin transfer molding, RTM, autoclave, pultrusion, spray-up etc. are also can be utilized. However, depending on type of polymer (thermoset, thermoplastic), type and form of fiber (reinforcements), you can select the right methods that suit your need.
There are many methods for fabricating hybride fiber, my lab focus on hybride optical fiber and develops a photo-plating method. If you need detailed information, you can rwrite me directly.
I hope that this review will be helpful
https://www.researchgate.net/publication/265346405_Hybrid_fiber_reinforced_polymer_composites_-_A_review
Article Hybrid fiber reinforced polymer composites - A review
Hand lay up is a common technique to prepare fiber composites. You can also follow pultrusion technique for continuous fiber.
Several different techniques are currently used for manufacturing the composites. Hand lay-up is a common technique to prepare fiber composites. Besides that, compression molding, infusion, resin transfer molding, RTM, autoclave, pultrusion, spray-up etc. are also can be utilized. However, depending on type of polymer (thermoset, thermoplastic), type and form of fiber (reinforcements), you can select the right methods that suit your need.
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Materials Science
- Materials
- Composites