How do I calculate the voltage requirement for electrocoagulation?

More Nilesh Kumar's questions See All

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

How to retain amplicon yield after Ampure bead cleanup, following a 2-stage PCR protocol?

Hello all, I have been trying to follow a 2-stage PCR protocol used to amplify barcodes of a large yeast library, as per Nyugen et al. (2022) -...

30 July 2024 841 2 View

How to add Cr parameter in autodock?

When I run autogrid4 it says: autogrid4: ERROR: Unknown receptor type: "Cr" -- Add parameters for it to the parameter library first! Look forward to your reply.Thank you so much!

29 July 2024 488 0 View

What is the relationship between the threshold voltage and the device's noise performance, particularly in terms of flicker noise and thermal noise?

The threshold voltage (Vth) of a MOS device plays a crucial role for its operation. At the same time, noise is an intrinsic factor. So how noise (flicker or thermal) change with the change in...

29 July 2024 3,246 0 View

What is the solvent system required to run tlc for calixarenes?

If you don't understand my question let me know

21 July 2024 563 1 View

Sample size for qualitative study?

I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...

20 July 2024 9,153 11 View

How to convert available phosphorus to total phosphorus?

I need to convert Available phosphorus into total phosphorus

18 July 2024 6,799 3 View

Can it is possible to find the cleaved sequence when a protein cleaved by a heamaglutanin protease (HA/P) by any bioinformatics tools?

Bioinformatics tools like peptide cutter

15 July 2024 6,453 1 View

How Can I Resolve a Persistent Unwanted NMR Peak at 1.25 ppm?

Hello everyone, I am facing a consistent issue in my NMR spectra with an unwanted peak appearing at 1.25 ppm. This peak seems to vary with the amount of sample: it becomes more pronounced with...

15 July 2024 9,065 4 View

Can we progress towards defining obesity based on body fat content?

The burden of obesity is enormous. The greater challenge lies in accurately diagnosing obesity at the right time, reflecting the true increase in visceral fat. BMI may not accurately represent...

14 July 2024 8,771 4 View

Is there any paper claiming that the creation of holes in electrodes has either no effect or a very negligible effect on the removal efficiency?

I am looking for papers that have investigated this topic and have claimed that the creation of holes in electrodes have almost no effect on the efficiency of contaminant removal in the...

15 March 2024 1,404 0 View

Why we are using copper electrode in electrocoagulation?

Recently I'm working in electrocoagulation of dye effluent with titanium electrode, what are the other electrode can be used instead of titanium ? Why?

12 February 2024 7,570 0 View

What is the best type of Al for electrocoagulant anode in waste water treatment?

I wanted to know the best type for aluminum anode for electrocoagulant in waste water tretament for beverage dairy industry

30 October 2023 667 0 View

How to Make Synthetic Wastewater?

I am conducting a research project on sulfate removal with electrocoagulation at a coal mine in Indonesia. I need to prepare synthetic wastewater that mimics the characteristics of the mine water....

23 October 2023 5,862 1 View

Is it better to work with current density or variable voltage?

I am doing my thesis project on the "treatment of slaughterhouse wastewater by electrocoagulation with aluminium electrodes". I am going to use direct current. I have read several researches and...

17 October 2023 7,941 3 View

Which refinery uses the electrocoagulation technique in the ETP?

Hello everyone, I need some information, which refinery used the technique of electrocoagulation process to treat the effluent?

23 May 2023 1,398 0 View

How to calculate specific energy consumption in kwh/kg of pollutant removal for electrocoagulation process?

I am doing experiment on electrocoagulation. For variation in current and voltage used DC power supply. which takes input from AC supply convert to DC supply and able to regulate the voltage for...

01 March 2023 6,254 2 View

How to better visualize middle cerebral artery in mice for dMCAO?

I've been struggling to get consistent results with distal middle cerebral artery occlusion (dMCAO), and I think my problem is that I'm not always finding the MCA. I mostly follow the JOVE...

28 November 2022 6,003 0 View

Which is the best way to perform electrode localization for silicon probe's implantation in rats?

Hi all, I would like to know if you have any advice on how to perform electrode localization from silicon probes used in rats. I find in the literature that the most used methods in rats are the...

09 October 2022 3,172 2 View

In electrocoagulation process, can Faraday efficiency exceed 100 %?

FeO3 was found to be more effective than FeO2 during my E.C experiment, but by taking 3 electrons the Faraday efficiency is up to 100% , should considere it when I will writte my paper or just...

14 September 2022 4,249 2 View