10 January 2014 1 10K Report

We want to know the applications of the Laviron equation in cyclic voltammetric analysis.

More Neethu Kalloor Sadanandhan's questions See All
For the socioeconomic scales calculation- Modified B G Prasad's scale- the Consumer price index have to be taken separately for rural and urban areas?

The modified B.G. Prasad's scale is used to assess the socioeconomic status of both urban and rural areas, which is based on the monthly Percapita income of a family. My question is whether the...

28 February 2024 4,671 0 View

I fabricated Si/PEDOT:PSS solar cell. But the IV characteristics of the cell is that of a normal diode and not that of solar cell. What's the reason?

The Si (1 1 1) was properly cleaned by ultrasonicated and etched prior to fabrication and PEDOT:PSS was also ultrasonicated also. Samples without the above procedure was also tried. 10 mm size...

16 October 2023 6,762 1 View

What is super ORS and Super super ORS? Can anybody answer it clearly?

Oral Rehydration Salt Solution is of many types including reduced osmolar solution and rehydration solution for malnutrition. This super and super super ORS remains a confusing grey area.

18 May 2023 673 0 View

Is TiO2 a good material for fabricating third generation solar cells with better efficiency and at low cost?

If not, which is the better material? Kindly share some papers for the same.

20 December 2022 9,351 1 View

NMDS for doubt clearance - NMDS PLOT of my data : I look forward to the interpretation of the attached NMDS plot prepared with R program?

It's Data of dung beetle species associated with 5 mammals namely elephant, cow, goat, buffalo and pig in an agriculture habitat . In  the NMDS plot , Pig  is in the lower part with -ve score on Y...

25 May 2021 5,332 9 View

Is there any method to increase neurotransmitters like dopamine or serotonin?

is there any method to increase neurotransmitters like dopamine or serotonin?

23 March 2020 8,377 2 View

Sample size determination using mixed logit model for Discrete Choice Experiment?

Currently I am working on the sample size determination of Discrete Choice Experiment. We thought of using mixed logit model . For the sample size determination, initial value parameter is one of...

05 August 2019 3,871 12 View

Can the power dissipation efficiency in hot deformation of metals become negative?

I have been developing the processing maps after hot deformation of a Mg-Rare Earth Alloy. The strain rate sensitivity, m, is becoming negative in some regions. Here, probably due to this, the...

21 June 2019 5,853 2 View

How to apply Marangoni shear stress in Fluent?

Hello all, I want to model the melting of a metal with Marangoni forces acting. I have specified the surface tension gradient. But I cannot find an option to specify surface tension at the...

07 July 2018 9,718 5 View

How to avoid starch precipitation from growth media?

My actinobacteria grow in 2.5% soluble starch supplemented to the media. After I obtain the supernatant and store at 4 degree Celsius for a couple of days, a white mass which I believe to be...

24 October 2017 6,690 3 View

Similar questions and discussions
What procedure should I follow for current controlled PPy film electrochemical deposition on ITO?

For example, I perform passivation process before electropolymerization of Py for adhesion to titanium surface. Is a similar or different procedure required for ITO? If necessary, I would be glad...

06 August 2024 3,176 0 View

Why might the impedance values for DI water and 0.1X PBS buffer solution exhibit a decreasing and increasing trend, respectively over time (HP 4194A)?

Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...

05 August 2024 3,783 2 View

How to choose the journal?

Hello I want a suitable journal in the field of remote sensing and machine learning to be judged quickly. Thank you for your guidance Thanks

01 August 2024 1,799 4 View

How to calculate conductivity using Electrochemical Impedance Spectroscopy's Nyquist plot?

Hello everyone, I am new to this characterization but watching videos on youtube I have already plotted a Nyquist plot (Z' and -Z'') and already fitted models on my material using Zsim. But now I...

29 July 2024 1,376 0 View

How to determine the charge passing during a cyclic voltammetry?

Dear All, here is my question: if I have a 15-scans cyclic voltammetry performed with PalmSens, how can I obtain the charge passed during the process? Hopefully avoiding integrations,...

29 July 2024 3,733 5 View

Why semicircle of nyquist plot is not complete?

While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...

26 July 2024 7,542 4 View

What binder would be the best choice to modify glassy carbon electrode with a 2D Material like Graphene or MXene?

I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?

23 July 2024 5,776 2 View

Can any of you suggest how to find the detection limit.?

I am working on flourescence sensing of heavy metals using quantum dots.Can any of you suggest how to find the detection limit. Whether it is calculated from formula or we can get from instrument?

19 July 2024 7,411 3 View

Help me download paper?

I have 2 papers below, but I can't access this, you can help me? Shuai Zhang, Xiaodi Li, Xingyu Zhou, Yuning Wang, Yue Hu, Cloud removal using SAR and optical images via attention mechanism-based...

18 July 2024 9,635 0 View

How do you decide an optimal AC amplitude for non-faradaic electrochemical impedance spectroscopy?

I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...

16 July 2024 5,031 1 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close