Which journals (Q1,Q2) accept simulation based design and results of antenna if fabrication and testing facility is not available?

I need a list of good (preferably Q1,Q2) journals that will accept research papers prepared on designs done with the help of simulation software e.g CST, HFSS etc.

08 February 2021 9,636 5 View

Proteins not stacking/ entering in a native PAGE. Can anyone help?

Hi. I am trying to study a biotin modification of my target protein in a crude cell extract and am interested to determine how much of my protein in getting biotinylated. After biotinylating my...

15 January 2021 2,214 4 View

Look for Book?

Can anybody give me the following writer book? Helen Deresky "International Management"

26 December 2020 5,109 5 View

What Electrolyte Solution should be used for EIS and CV, While material I'm using is Carbon doped Titania as a counter electrode in DSSC?

Hope so, you are all fine, I want to perform EIS and CV of my material Carbon doped Titania as a counter electrode for DSSC, I just want to know what electrolyte solution and in what molar...

25 December 2020 7,095 3 View

Look for details for the following reference for citation?

22 October 2020 9,252 4 View

Look for methodology?

Evaluating training design is similar to evaluating trainees reaction?

19 October 2020 4,575 4 View

Look for methodology?

I will do single group pre post test in evaluating training. In that case, what strategy i should follow between experimental or survey research?

03 October 2020 5,326 6 View

Can anybody give me the reference including page no of the following citation?

Mayer and Pipe (1983) suggests that the reasons for strategic plan for training evaluation is to evolve a careful methods of assessing and reporting training effectiveness, so that the...

19 September 2020 2,319 2 View

Inflection POS-suffix dataset ?

Hello, I am trying to find a dataset of canonical suffix forms for Parts of speech tags. For example, ed->VBD (past tense), ing-> VBG. Is there any available dataset like this? Thanks!

01 August 2020 5,066 2 View

Need help regarding the statistical analysis of various groups treated with various doses (single vs double)of a drug. Results are the in percentage?

There were four groups; A, B, C and D with each group containing 15 birds. All birds are of the same age. Other environmental and experimental conditions for all the groups are also same. Group A...

11 June 2020 4,834 4 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

How to improve and implement WBAN MAC and Radio modules under Castalia 3.2 ?

Hello researchers, Hello Castalia3.2 researchers I am a beginner with Castalia, I work on optimization of RFID systems used in wireless body networks. I simulated a WBAN with 10 nodes and one...

28 February 2021 400 1 View

D2D implementation in Matlab in Vienna LTE software?

Hi Hope you are well. Can you please share your code for D2D implementation in Matlab. I want to implement D2D in Matlab based Vienna simulator and struggling to deploy D2D. Thanks

24 February 2021 9,378 3 View

What software programs can directly simulate Additive Manufacturing Directed Energy Deposition (DED)?

I understand there are a lot of software programs that can simulate DED by going through specific modeling, simulation, and commands. For me, that was time consuming and results were not accurate....

24 February 2021 4,428 3 View

Is it possible to set a breakpoint at a specific DYNAMIC instruction using the GNU Debugger (GDB)?

Using GDB, it is straightforward to debug and monitor a target program by setting a break-point at a specific instruction, since the instruction addresses are known. However, we have two...

24 February 2021 1,598 2 View

Langevin Dynamics in shear flow?

Hi, We are trying to simulate particles with Langevin dynamics in a shear flow by Lees-Edwards boundary conditions in MD simulations. It seems thermal forces and shear flow do not go hand in...

23 February 2021 1,761 1 View

Should I use Pressure Based Solver or a Density-Based Solver?

Dear researchers, I want to simulate a flow (air) in a wind tunnel, and I want to integrate a fluidic actuator inside it in order to control the separation of the boundary layer. At the blower...

22 February 2021 4,882 3 View

How to simulate 5G Quality of Service characteristics?

For my research, I would like to simulate an end to end 5G network. My goal is to observe the behaviour of SDAP protocol, dynamic configuration of 5QI values etc. To summarize I would like to...

21 February 2021 7,624 3 View

Open Source IoT Simulators supported by Machine Learning?

Dear Research Gaters, Let me first add context to the question. I am looking to simulate the waste management system and resources of a city. The hardware devices I need to simulate include,...

21 February 2021 2,333 4 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View