we specialize in styrene-butadiene emulsion polymerization, we run conversion to 60%, and we recover the unconverted (1.3 butadiene) at a purity of average of 73% and major impurity is (cis-2 butene), how can we minimize this impurity formation
You can try to change the solvent of emulsion polymerization because that the content of 1.3 butadiene is controlled by the polarity of the solvent.
i am trying to find outh the simplest and accurate method of determing the amount of free/residual 1.3-butadiene and styrene from in process latex/polymerization. my challenge is to accurately...
03 April 2015 609 3 View
We specialize in a styrene-butadiene emulsion polymerization, we run conversion to 60% and we recover the unconverted (1,3- butadiene) at a purity of average of 73% and major impurity is (cis-2...
31 December 2014 8,664 4 View
We specialize in emulsion SBR manufacturing, in the storage tanks we sometimes experience latex auto-coagulation that forms rubber gel, and as a result we have to dump these gel crumbs. Any idea...
31 December 2014 3,380 9 View
we specialise in cold polymerization of styrene and butadiene, and we are loosing butadine during polymerization in dimerization to (4 -vinylcyclohexene) about 8% is found during GC analysis i...
11 December 2014 5,164 5 View
Does anyone have the literature explaining the effect of 4-vinylcyclohexene on the degradation of polystyrene and on the polymerisation of styrene?
11 December 2014 899 0 View
i am having a problem with color of sb rubber (1502) having a yellowish/brownish color, i would like it to be as white as possible, reciep used: soap-fatty acid and SA40...
10 November 2014 5,462 6 View
i would like to change from sulphuric acid to organic acid as coagulating agent for SBR, and i would like to know the advantages and disadvantages with regard to this change
10 November 2014 4,610 1 View
I would like to improve the stripping of styrene from an emulsion batch(Semi-continuous batch process). We transfer batch from reactor to stripper and inject direct/live steam at stripper bottom...
10 November 2014 2,518 12 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
Fatal error in MPI_Allreduce: Other MPI error, error stack: MPI_Allreduce(1628)......: MPI_Allreduce(sbuf=000002459254A180, rbuf=000002459F86A140, count=4851, MPI_DOUBLE_COMPLEX, MPI_SUM,...
09 August 2024 7,615 1 View
We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...
08 August 2024 4,842 0 View
What is the prepared reference material that can be used in the ICPE-9820 Shimadzu Japan instrument, which employs inductively coupled plasma optical emission spectrometry (ICP-OES) to measure...
06 August 2024 1,896 1 View
is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it
06 August 2024 947 1 View
Citi BLOC Standard Basket Definitions: A standardized unit representing a fixed basket of construction materials, labor, and equipment costs priced in various cities. Purpose: To create a common...
04 August 2024 8,997 1 View
What is the method for analytically calculating the wear and service life of polymer-polymer sliding pairs?
04 August 2024 1,078 1 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.
29 July 2024 6,350 3 View
If the pairs are similar, will it reduce the adhesion due to electric charges?
29 July 2024 3,185 2 View