How can i create a bulk nanostructured polycrystalline material in LAMMPS?

Ahmad Ostovari Moghaddam @Ahmad_Ostovari_Moghaddam

02 February 2016 1 4K Report

Zhaoyang Hou

E-mail address: [email protected]

Kedharnath Arumugakani

These links will help:

http://atomsk.univ-lille1.fr/tutorial_polycrystal.php

http://li.mit.edu/A/Graphics/A/utils.html

https://kedharnath1992.wordpress.com/category/grain-boundary/

https://bitbucket.org/arunpksh/nanosculpt/wiki/Home

Badges
Science topic

More Ahmad Ostovari Moghaddam's questions See All

How to remove brazing alloy (de-brazing) from tungsten carbide?

I'm going to reuse brazed crash tungsten carbide grits (it is WC with irregular shape). I am looking for a solvent to completely dissolute the braze alloy (Cu40Zn10Ni), without any damage on WC...

04 May 2019 2,413 4 View

Can anyone suggest the most accurate software for simulation of crystal growth from the melt, especially Gallium-Arsenide?

Simulation of all crystal growth growth from melt, especially LEC and VGF processes

10 November 2012 8,355 2 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Energy minimization in LAMMPS using NVT ?

How do I do energy minimization in lammps with NVT ensemble ? I am using the following command and it does not seem to work. It stops at extremely high energy and gives me the error zero search...

01 March 2021 2,294 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View