Any information about dinitrosalisylic acid reagent end point color stability ?

I work on estimation of alpha amylase activity using dinitrosalisylic acid reagent If i put the reagent to stope the enzymatic reaction and allow the reagent to react with the produced reducing...

17 February 2021 7,402 4 View

Can any one explain why the ethyl ester Biodiesel (FAEE) has higher than that of the metyl ester FAME- both of them are derived from the same oil?

Biodiesels derived from waste vegetable oil transesterification with Ethanol (FAEE) show higher peroxide values than those derived by transesterification with methanol (FAME) prepared under the...

13 February 2021 193 6 View

Are Signal Peptide and Transit Peptide different? And what are their functions?

I want to learn about mutation in transit peptide. Can mutation in transit peptide affect the function of the protein?

20 January 2021 396 3 View

What is the average stove efficiency for household gas stove especially in the Indian subcontinent?

In one paper, I saw it to be about 36%. But as the paper was published in 1997, shouldn't modern household gas stoves be more efficient?

14 December 2020 6,199 6 View

Auricular chondritis with cervical lymphadenopathy of left side in a 20 year old lady can we start anti-TB drugs?

10 December 2020 4,253 3 View

Log 10 transformation versus Benforrini correction?

We have conducted a study to compare the effects of 3 training methods on body composition and cardiovascular risk factors. A Log 10 transformation was applied for all non-normal distributions,...

10 December 2020 877 5 View

Is there a guide for Aspen Hysys to show unit operation calculations?

For example, let's say if I design a conversion reactor and give inlet temperature,pressure,composition and reaction kinetics then Hysys will show me the outlet conditions. It doesn't,however,show...

09 December 2020 8,375 3 View

Why only less than .3 mm sieved samples are considered in microplastics observation???

Basically, I was looking for the laboratory method for microplastics observation from a seawater sample and beach sample. Most of the cases, they followed some criteria to get a precise amount of...

09 November 2020 8,485 6 View

Can anyone tell me the list of antibiotics which are sensetive and resistanc to Pseudomonas flourences and Pseudomonas puituda bacteria ?

I am now working on conjugation process between Pseudomonas flourences and Pseudomonas puituda bacteria, so in order to confirm that the genes are transferred, we need to use antibiotics, so...

31 October 2020 509 3 View

Scan rate and potential window vary current density will vary in terms of lsv?

Hi,respected all ,I observed that if I vary scan rate in LSV ,the current density will also vary as well as if I change the potential window ,the current density will also change ,is it right or...

10 September 2020 3,763 2 View

Timeout error!! Processor in the loop (PIL) using STM32F4 Matlab 2018a?

Dear Researchers I am trying to perform a PIL simulation using STM32F4 Discovery board and comunication serial USB TO TTL. During simulation I receive the following timeout error: An error...

01 March 2021 2,327 1 View

No title

I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...

25 February 2021 2,615 3 View

How Can I clain a removal of a co-author?

I would like to make a correction in a co-author in your paper which is wrong. This name is also in other papers of Kenton Ko. Zey Ko is not a Co-author . The correct name is Zdenka...

24 February 2021 3,476 4 View

How does the injection volume impact LLOQ and ULOQ in regression analysis (LC-MSMS)?

Hello, I have run into an issue that has sparkled a debate at work: is the LLOQ/ULOQ impacted by injection volume under the following circumstances: 1) Same dilution factor of all samples 2)...

23 February 2021 9,159 3 View

Difficulty in debugging code to correct error - TypeError: '<' not supported ?

I am trying with a Unet code ontained from net ...in tensorflow. When trying to predict the segmentation result with the trained and saved model with metric " iou" using "CustomObjectScope"...

22 February 2021 5,254 1 View

How to perform Haldane correction on SPSS?

I was wondering if anyone knew how to perform the Haldane correction for SPSS (this is the definition of the correction -...

21 February 2021 2,882 1 View

absorption= 1-mag(S(FP1:1,FP1:1)*S(FP1:1,FP1:1))-mag(S(FP2:1,FP1:1)*S(FP2:1,FP1:1)) is it correct for absorption ?

hi everyone I am simulating a unit cell structure in HFSS using Flouquet port having two modes for absorption I have used this formula:- absorption=...

17 February 2021 9,178 2 View

How can I calculate the magnetic force applied from a magnet (no electrism)?

I would like to calculate the magnetic force on a Fe304 particle which is into a liquid solution . The magnet is above the solution , and there is no electricity. I found this formula : F = (V...

13 February 2021 4,770 3 View

What is the best way to do symmetry in ANSYS Fluent for flow between two concentric cylinders ?

I am working on Taylor Couette flow between concentric cylinders and the results are correct for the full case. however, I wanted to do symmetry case to improve the mesh. I have tried periodic...

11 February 2021 2,193 6 View

What is the ideal value of UACI for image encryption scheme?

UACI - Unified Averaged Changed Intensity between cipher images. Why some papers refer ideal value to be 33.33 and some refer it to be 33.46? Which is the correct value? (In reference to image...

11 February 2021 9,562 2 View