How can I model hyopyotectod steel (Ferrite proeutectoid) in DEFORM 2D/3D?

Ferrite proeutectoid is constructed during heat treatment process. I would like to know how to model it in DEFORM 2D/3D.

03 April 2018 8,183 0 View

How to plot stress strain form loading and unloading data (raw data)?

Actually I would like to plot stress strain curve from raw data consists of loading and unloading responses. I don't know how to remove unloading data.

04 May 2017 2,886 3 View

Does anyone work on scalable cellular automata and relation between time and mesh size?

Your toughest technical questions will likely get answered within 48 hours on ResearchGate, the professional network for scientists.

09 October 2016 5,038 0 View

Does anyone work on deterministic transformation rule used in cellular automata (calculation of velocity and its fraction)?

08 September 2016 8,134 1 View

How can I find Cellular Automata for material simulation?

03 April 2016 5,314 2 View

How can I refine elastic stiffness matrix which is losing a little its singularity?

In extended multiscale finite element, macro elements are constructed numerically with micro elements. sometimes macro elements are losing their singularity. In fact, the condition number is in...

10 November 2015 8,201 1 View

How could vectorization be applied to construct elastic stiffness matrix with heterogeneous material properties ?

10 November 2015 2,181 5 View

Does anyone know how to transfer pixel data ( from image processing) to fem data?

I did image processing in Matlab and now I have a matrix with array 0 and 1. I wanna use this to fem model. Is it true that each pixel treated as Q4 element?

01 February 2015 8,204 3 View

Which is a lucid standard comprehensive book to guide on psychological scale construction and its standardization?

02 March 2021 7,082 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Is there a deep reason for using the squared modulus of the wave function as the probability density of the existence of the particle?

I think we were all surprised at the first time we got to know quantum mechanics that the squared modulus of the wave function is the probability density of the existence of the particle? The role...

28 February 2021 6,282 9 View

Does anyone have a sequence for the human CD34 promoter?

I'm looking for the human CD34 promoter sequence to engineer into a vector construct. Can anyone recommend a good source for this sequence? Thanks very much, Laura

25 February 2021 8,205 1 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

Why does the sum of reaction forces not match the force component of a Free Body Cut in Abaqus?

I am using Abaqus to simulate a plate with in-plane loading. The boundary conditions allow the right edge to move up and down, the displacements on the left edge are fixed. There is no rotation...

23 February 2021 711 3 View

Should I use Pressure Based Solver or a Density-Based Solver?

Dear researchers, I want to simulate a flow (air) in a wind tunnel, and I want to integrate a fluidic actuator inside it in order to control the separation of the boundary layer. At the blower...

22 February 2021 4,882 3 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

How can I obtain Reaction Forces in ABAQUS?

I am trying to simulate a simplified version of a beam resting on 10 points using Abaqus. The solutions I want to obtain are the Reaction Forces in each resting point or area when applying a...

21 February 2021 3,075 2 View