Aspen Plus Error: Unknown or undefined bead number?

Hello, in my Aspen Plus Simulation (see attachment) there are two heat exchangers. One HEX1 (oil+gas) ist fed by hot gas which ist coming out of a burner. The other HEX2 (gas+gas) shall work as a...

14 February 2021 8,096 2 View

How to design a reactive extraction process in Aspen Plus?

Hello, my task is it to create a specific extraction process. There is a mixture containing water, nitric acid and hydrochloric acid. It is known, that tributyl-phosphate is a solvent, which...

03 January 2021 4,163 3 View

Is there a tutorial for Gasification process With DWSIM Software?

Dear Researchers, I am trying to model a gasification process for biomass on DWSIM. (Aspen plus is expensive and unreachable). I have been doing lots of searches but couldn't find anything. Is...

02 January 2021 842 4 View

Is there a guide for Aspen Hysys to show unit operation calculations?

For example, let's say if I design a conversion reactor and give inlet temperature,pressure,composition and reaction kinetics then Hysys will show me the outlet conditions. It doesn't,however,show...

09 December 2020 8,375 3 View

Exergy destruction mathematical calculation in kW?

somebody, please elaborate on how to calculate exergy destruction in kW units. from Aspen HYSYS I found mass exergy with kJ/kg unit and i don't know how to calculate it by using Aspen HYSYS and if...

25 November 2020 2,675 3 View

How to link excel with Aspen plus?

Is there any way to connect excel data sheets with aspen plus as inputs to perform parametric analysis?? I want to change input parameters for a certain range to see system performance

28 October 2020 2,174 3 View

Path to node for column diameter while linking Aspen with excel or Matlab?

i am optimizing a reactive distillation column. I have simulated a base case in Aspen Plus and now want to calculate its total annual cost in Matlab. while linking aspen Plus and Matlab i need...

01 October 2020 207 2 View

Can Aspen Plus be linked with Matlab or Python?

I would like to know if Aspen Plus can be linked with MATLAB or Python?

23 September 2020 1,794 2 View

How can I use the refrigerant mass fraction / mole fraction value for optimization ?

I am working on LNG plant optimization and using Matlab and Hysys as optimization and process simulation software, I already interface them. When I am using the compressor outlet pressures as...

15 September 2020 1,115 2 View

How to built a simulation of a chemical process?

12 September 2020 7,685 10 View