Hello, how do I enter aspen plus a starch and water mixer?

Aspen Plus Error: Unknown or undefined bead number?

Hello, in my Aspen Plus Simulation (see attachment) there are two heat exchangers. One HEX1 (oil+gas) ist fed by hot gas which ist coming out of a burner. The other HEX2 (gas+gas) shall work as a...

14 February 2021 8,096 2 View

How to design a reactive extraction process in Aspen Plus?

Hello, my task is it to create a specific extraction process. There is a mixture containing water, nitric acid and hydrochloric acid. It is known, that tributyl-phosphate is a solvent, which...

03 January 2021 4,163 3 View

Is there a tutorial for Gasification process With DWSIM Software?

Dear Researchers, I am trying to model a gasification process for biomass on DWSIM. (Aspen plus is expensive and unreachable). I have been doing lots of searches but couldn't find anything. Is...

02 January 2021 842 4 View

During my work in the laboratory?

During my work in the laboratory, I noticed that fructose, starch and dextrin did not give positive results with their statements such as iodine and sulwanof when prepared 3 to 5 days ago. Why?

25 December 2020 8,390 5 View

What's a cost effective way to make starch based nanocomposite hydrogels in large scale?

starch based nanocomposite hydrogels

13 December 2020 431 4 View

Is there a guide for Aspen Hysys to show unit operation calculations?

For example, let's say if I design a conversion reactor and give inlet temperature,pressure,composition and reaction kinetics then Hysys will show me the outlet conditions. It doesn't,however,show...

09 December 2020 8,375 3 View

Exergy destruction mathematical calculation in kW?

somebody, please elaborate on how to calculate exergy destruction in kW units. from Aspen HYSYS I found mass exergy with kJ/kg unit and i don't know how to calculate it by using Aspen HYSYS and if...

25 November 2020 2,675 3 View

Zeta Potential measurement of starch solution?

I want to measure the charge on the particles in the solutions using zetasizer, but the experiment needs R.I and absorbance co-efficient to be conducted, but i cant find the stated valued for the...

08 November 2020 3,691 9 View

How to link excel with Aspen plus?

Is there any way to connect excel data sheets with aspen plus as inputs to perform parametric analysis?? I want to change input parameters for a certain range to see system performance

28 October 2020 2,174 3 View

What are the differences between an ultrasonic homogenizer and a vortex mixer? What are their ads and cons?

I want to suspense and mix my micro/nano-particles inside a solution. What are the differences between an ultrasonic homogenizer and a vortex mixture?

05 October 2020 5,606 3 View