I want to implement Simulink model as shown in attached figure. But the problem is how to get the DSK6713 which is shown in the right-south corner of the figure? Which software is required ? I have CCS, matlab but don't find such type of block in my matlab simulink. My I missing RTDX?
Hi Ajit Kumar
you have to install "Embedded Coder Support Package for Texas Instruments™ C6000™ Processors" which includes the library "C6713 DSK (c6713dsklib)" then your implementation will work properly,
Best Wishes
@wasim ... Thanks dear. I got the solution. Actually DSP6713 works with matlab 2007 or 2008 version only. When I installed that old version of matlab then I found RTDX and target preference in DSP library. Now I am looking to carry my work. But anyway thanks for your reply
Dear Ajit:
You will find information about about hardware support here https://la.mathworks.com/hardware-support/home.html
In order to work with new DSP devices instead older ones. NXP microcontrollers, even DsPIC from microchip are supported now.
Grettings from Mexico
The following papers may be interesting for the DSP implementation of communication systems: Conference Paper Simulation and DSP implementation of ADSL modem using C6713 processor
Conference Paper Frequency Hopping Spread Spectrum Transceiver Implementation...
Best wishes
- Badges
- Science topic