Can someone suggest a way to prepare slides to observe under confocal microscope for observing fluorescent tagged proteins??

I am growing the cells on coverslips and transfecting the fluorescent tagged protein directly on them. Then i want to observe these cells under confocal microscope. Currently i am just using...

01 March 2021 6,142 3 View

Monte Carlo simulation?

Hi, i am conducting a Monte Carlo simulation for my new distribution but the MSE values are increasing while the sample size increase, does any experience this issue before and what should i do...

22 February 2021 3,680 4 View

How or where can I get the crystallographic information file (CIF) for PCN-222 MOF?

I need the simulated XRD pattern of PCN-222 to compare with experimental data. Thanks.

19 February 2021 4,932 3 View

Is There are any idea to achieve H NMR signals for swollen compound ??

the samples are not completely soluble - just swelled the solvents that's mean the sample may be partially soluble any suggestion, please

16 February 2021 8,801 3 View

Are there any papers that deal with the effects of climate change on the pollination in Tropical orchids?

There are a few papers dealing with the effects of climate change on the pollination of European orchids, but I wonder if similar studies have been carried out in the Tropics.

04 February 2021 1,818 4 View

How to report path analysis / SEM with Yuan-Bentler correction from R output?

Dear all, I am currently writing my master thesis where I am analysizing my data using path analysis and SEM in R (lavaan package). Now that I like to write up my results, I am struggling with...

04 February 2021 8,993 2 View

Is there a way to get rid of TEA in a TLC plate in order to do proper staining?

Dear colleagues: I have been trying to establish a few HP-TLC methods in the lab. In general, for quantification purposes, I prefer CuSO4+acid charring, to primuline staining. Lately I have been...

20 January 2021 9,019 1 View

What is corrct way to define ports when simulating FSS and surface waves in CST?

I need to simulate a mushroom FSS and I'm struggling with the ports. What's the correct way to define them? Should I construct a proper SMA connectors, or is it enough to put a waveguide ports...

19 January 2021 6,590 4 View

Connection between Matlab and visual studio?

i am working in transfer of images between two computer . I don't know how to make connection between Matlab and visual studio . i used a visual basic for programming my controller. Can anyone...

31 December 2020 6,708 4 View

What are the inhibitors or chemicals which prevent the amplification of plant DNA? How they can be remove?

While doing amplification with Primers ( which already gave good amplification in same genus), it fails many time, eventhough the extraction has enough amont of DNA.

31 December 2020 5,649 4 View

Guidelines for survey (question type) analysis?

Hi. Please tell me what guidelines should i need to follow for questionaries' type research work in India. It is not hospital based work, we are conduction basic institutional based qualitative...

03 March 2021 2,037 3 View

No title

02 March 2021 932 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why do the air flow results vary totally when adding scalar in CFD ?

Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...

25 February 2021 9,602 4 View

Is is possible to pole with corona poling pellets of the sample material instead of thin films?

As it is highly probable that pellets will have a higher degree of air gaps and voids than thin films, is it possible to pole the samples with corona poling nevertheless? Or is there the...

24 February 2021 1,349 1 View

Have you ever experiencing air vent trouble in fermentation process?

Dear all, My research group is currently working with a 12-litre fermenter. Somehow, if we do the fermentation for more than 20 hours, the process will be more prone to contamination. Our current...

23 February 2021 1,908 2 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

No title

19 February 2021 8,647 3 View

What type of pressure sensor are usually used in microfluidics?

My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...

18 February 2021 9,928 2 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View