From where can one get a multi-layer antenna fabricated having ROGERS Duroid RT-5880 as its PCB substrate? Web links please.

More Waleed Sethi's questions See All

Excite antenna with laser and see thermal response/output voltage in CST MWS?

Dear Members..Good day to all. Kindly answer my following queries regarding CST simulator; 1. How to excite an antenna designed in CST MWS with an infra red laser at 1550 nm and observe its...

06 July 2018 6,450 4 View

Optical properties of polymer material PDMS [Polydimethylsiloxane] at 1550 nm ?

Dear Members Can someone please let me know the optical properties of polymer material PDMS [Polydimethylsiloxane]. I want to the [n k] values; dielectric constant and loss tangent of PDMS at 1550...

01 February 2017 234 0 View

How do I simulate a Silicon Substrate in CST with 380 um Thickness?

Dear Members, I am designing a simple transmission line in CST MWS on a Si Wafer. The dimensions of the wafer are in um and the center frequency is 200 THz. I have selected the optical template in...

09 October 2015 7,438 5 View

How do you decide an optimal AC amplitude for non-faradaic electrochemical impedance spectroscopy?

I work with planar interdigitated electrodes (IDEs). The finger width and the spacing between the fingers are 5 micron. The surface of the IDEs is coated by a non-conductive polymer layer...

16 July 2024 5,031 1 View

How to find ECC from radiation pattern on cst ?

i need to find ECC for 4-MIMO antenna using radiation pattern on CST

16 July 2024 7,291 1 View

What should I upgrade in my computer to speed up simulation in CST?

I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...

10 July 2024 2,789 4 View

What is Differential-Fed in microstrip patch ant? How it is design in CST studio? What is process and procedure to do Differential-Fed in CST studio?

What is Differential-Fed in microstrip patch antenna ? How it is design in CST studio? What is simulation process and procedure to do Differential-Fed in CST studio ?

08 July 2024 7,464 1 View

How to know the TM/TE modes in antenna design in CST studio?

How to know the TM/TE modes in antenna design in CST studio? Example: TM01 ,TM02 ,TM10, TM12, TM30 like this... how can identify the antenna is operate the above said mode? can any one explain...

08 July 2024 6,609 2 View

How to give excitation to Crossed Dipole Antenna in HFSS?

I'm attempting to simulate a crossed dipole antenna. For excitation, I've placed a lumped port along each dipole. However, the resulting radiation pattern is similar to that of a single dipole....

08 July 2024 1,876 3 View

How to simulate FSS with patch antenna in HFSS ?

I want to simulate square loop fss with antenna so that it can work as a filter . how to simulate it in HFSS

29 June 2024 4,840 1 View

Do you have any suggestions to illustrate the antenna design effectively except for CST, HFSS, FEKO, and Matlab?

24 June 2024 3,381 3 View

Which solvent and substrate is found to be best suited for deposition of electrodes with MXene ink?

Suppose we have dried MXene slurry (Ti3C2Tx), then the combination of which solvent (in which this dried MXene slurry powder will be mixed, subsequently forming the "ink") and corresponding...

13 June 2024 5,763 0 View

How does the radiation box dimensions need to be calculated when making an antenna in HFSS?

#AntennaTheory

12 June 2024 5,935 5 View