Hello researchers,
I have done a distribution power flow in an IEEE 123 bus distribution system. The results obtained seems to be logical; in the sense voltages relation ship between buses are perfect (when considering zero generation in the system and all the power is imported from the slack bus to satisfy load).
But there is mismatches in relationship of Pgeneration=Pload+Plosses. Kindly provide your valuable suggestions for resolving the issues or using alternative platforms. Any previous results or materials related to this will be helpful.
Thanks!
Which platform you have used for performing backward/forward sweep method?Have you written your own codes ? Can you tell me whether MATPOWER can be used to perform this load flow with FDLF BX method,if yes then where can I find the required input data for IEEE 123 test feeder which can be accessed by MATPOWER ??
Hi Ishan,
I written my own codes to do the power flow. I haven't used any software to do the dist system power flow. If you get the basic concepts, it's pretty easy to do the power flow using Matlab coding.
Additionally, if you intend to do reconfiguration then your own codes may help more than the software's I think.
Did you have the required input data for IEEE 123 test feeder which can be accessed by MATPOWER? May you share it ? Thanks.
Do anyone have IEEE123 test system backwards forward load-flow Matlab code.
- Badges
- Science topic
- Similar topics
- Physical Sciences
- Energy