How to add a journal?

I would like to know how to register the journal Flora Montiberica (ISSN 1138-5952 - eISSN 1988-799X) in Research Gate.

02 March 2021 8,156 2 View

Is it possible to obtain a negative cronbach alpha?

Good evening everyone. If a questionnaire has 4 factors measuring different constructs as for example CAMI questionnaire measuring attitudes toward the mentally ill that has four factors:...

18 February 2021 3,223 3 View

What is the best way of processing very large files in python?

I want to process a very large file, let's say 300 GB, with Python and I'm wondering what is the best way to do it. One limitation is that my algorithm needs the whole file in memory, so a...

15 January 2021 6,691 4 View

Which plants and trees have the best ability to prevent the entry of particulate matter (PM2.5 and PM1) and nanoparticles in indoor environments ?

In recent years our group has highlighted the importance of trees and plants in public and recreation parks in large mega cities. However, we are interested in developing "green shields" to be...

05 January 2021 6,500 3 View

ISO antibody against BFP for FFPE IHC?

Suggestions and recommendations welcome. Any usage/protocol experience would also be helpful/appreciated. Cheers

22 December 2020 599 3 View

No title

Entre mi alumnado me encuentro con un alumno con problemas cognitivos donde no es capaz de expresar emociones ni gestionarla y me gustaria encontrar articulos y recursos para poder tratar con el...

10 December 2020 8,292 6 View

Which is the best software to do a finite element analysis for composite materials?

we also want this composite material to be able to be modeled for mechanical testing.

19 November 2020 2,069 4 View

PVDF membrane degradation?

Hi, I'm performing western blots on different samples and I'm facing a some problems after eletrotrasnfer with PVDF membranes. In general, during the incubations with the primary and secondary...

18 November 2020 6,412 7 View

Can the BMI be calculated in rats?

22 October 2020 2,727 5 View

How to properly apply Gaussian G3 method?

19 October 2020 4,623 3 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Anyone that can help with Maxquant TMT16plex which is missing?

Hi I am very new to proteomics analysis. I have got raw files from core facility running thermofisher TMT 16plex 4 hours. I cannot find on maxquant the option TMT16Plex there is only up to 11...

25 February 2021 1,675 3 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

Model Volume fraction and magnetic field applications of nanofluids in ANSYS?

Hi I am working recently on a project where I have to study how the thermal properties or heat transfer enhancement of nanofluids as the volume fraction changes, or if a magnetic field is applied...

22 February 2021 961 2 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View