Epoxy company/distributor in Jordan?

Nisrin Abdelal @Nisrin_Abdelal

03 March 2016 1 4K Report

Dear All,

Are there any companies or distributors in Jordan that sells epoxy for composite materials manufacturing purposes?

Thank you very much

Donal Mcnally

Try Ashland Jordan, a manufacturer; or Venus Chemicals, a distributor. Have you heard of Google?t

Badges
Science topic

Similar topics
Econ
Manufacturing

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

How Can I Apply Hashin Damage Properties to Solid Elements in Abaqus Without Using VUMAT?

Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...

28 July 2024 8,169 0 View

A positively charged and 10x his-tagged protein that doesn't bind to any chromatographic resin?

Hello everyone, I am currently working on a protein that is 10x his-tagged and positively charged (predicted pI=10.16). But when I tried to use Ni-NTA column to purify the protein, it's not...

24 July 2024 7,293 4 View

What is the principle/mechanism behind aging of carbon (graphite) containing refractory mix for isostatically pressed refractories?

The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.

23 July 2024 3,205 0 View

Prevent sedimentation and maintain the suspension of powder particles in the resin ?

Hello, I am experiencing an issue with mixing micro powder with resin in a 3D printer. The problem is that sedimentation occurs after a short period (about half an hour to an hour). Could you...

23 July 2024 1,672 0 View

Any relation between resin viscosity（mPa*s）and resin relative molecule weight？why the former is used in manufacture?

https://en.wikipedia.org/wiki/Viscosity

21 July 2024 3,089 4 View

Is it possible to conjugate an NHS ester to the N-terminus of a peptide ON RESIN?

So i have a few peptides (synthesized by SPPS and not cleaved from resin) and I want to add a maleimide label. We have NHS-PEG-Maleimide and from literature it is evident that the free amine group...

18 July 2024 4,075 3 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View

Recommendations for his-tag magnetic beads / resins?

Good day everyone, Trying to perform protein purification for the first time, gotta buy the whole equipment/reagents. Protein of interest 48 kDa (Antithrombin), expressed from his-tagged plasmid...

16 July 2024 3,692 6 View