Here are some parameters need to include in my simulation code (.tib file ) in Tibercad and want to know how to include them in the code.?
2. Sheet resistance of coated glass substrate RTCO 3. Shunt resistance RP 10 k) Exp. 4. Roughness factor Rf 1000 5. Trap exponent
6. Trap DOS
Dye Solar Cells are interesting third generation photovoltaic devices. A DSC is fundamentally an electrochemical device where a molecule chemisorbed onto the surface of a porous material absorbs light and transfer an electron to the substrate. This allows to use materials with a large amount of defects achieving in the meantime high efficiencies beyond 10%.
The DSC-Dye Solar Cell module of tibercad allows the simulation of a complete model of the full cell, including all the different parts of the device: the porous material, the photoactive dye, the electrolyte surrounding the semiconductor and the two contacts. Tibercad is a software tool for numerical simulation in the field of electronic and optoelectronic devices. It allows to model and design innovative and nanostructured devices, such as III/V LEDs, nanowire FETs, Dye Solar Cells (DSCs).
That's all known sir...kindly please spread some light on the question asked above.
- Badges
- Science topic
- Similar topics
- Computer Science and Engineering
- Coding