I want to know whether the temperature of the optical film must exceed the melting point of the material when it is ablated by laser.
Not always, but most of the time macroscopic laser damage does involve local heating and melting of the material.
Depending on the wavelength of the laser and absorption characteristics of the film, damage may occur even before apparent heating and melting take place
Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...
15 July 2024 9,974 1 View
When Streptomyces undergoes conjugation transfer, it is always contaminated by a type of yellow Pseudomonas. What could be the reason for this?
07 July 2024 5,480 2 View
Are the weights of convolution kernel in CNN(convolution neural network) pre-desighable before trainning?
20 June 2024 6,501 6 View
In CNN(convolution neural network), can the feature map obtained determinately by a random initialization convolution kernel? if not, how to decide the weights in convolution kernel to obtain the...
20 June 2024 6,418 6 View
As the known, there were the most richness species diversity of the cave animals, especially for the cave fishes, because the underground river sytems. But there were the diffculties exist also,...
14 May 2024 9,131 0 View
Resveratrol supplementation or diet intervention effects on heart-liver axis in prediabetic female rats submitted to high-fat-high-sucrose diet
08 May 2024 9,890 1 View
05 May 2024 8,818 2 View
I am working on pancreatic cancer. Now, I am trying to generate a pancreatic exocrine organoids using my KPC mice. But after I checking the protocol, PancreaCult™ Pancreatic Organoid Growth Medium...
20 April 2024 3,879 1 View
I'm not sure how to interpret or fix the sample so that it creates a normal band. I used Percoll Gradient with density gradients to generate the questionable band. It's supposed to represent...
14 April 2024 9,350 1 View
One day when we made our regularly used medium, we noticed the initial pH was much higher than usual (above 6.0. usually it is around 4.0). It seems it only happened in our lab. The neighbor lab...
19 February 2024 5,250 4 View
i am unable to interpret why its increases in start as shown in figure
11 August 2024 2,175 1 View
Census data seems only to reach the year 2011, but there might be estimates somewhere that I cannot find? I am looking not only for the largest cities but also towns etc. Thanks!
10 August 2024 856 4 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
I am puzzled about the properties of gelatin, when used for tissue-embedding. Hard gelatin can be melt again by temperatures about 40°C. Formalin-fixed gelatin is like crosslinked protein and...
07 August 2024 1,684 1 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,986 3 View
I am interested to know the behavior of dyes toward light. Specifically, Blue dyes re-emit the spectrum, especially from the green zone (known as principal in LED lamps, and blue dyes are known...
05 August 2024 3,289 1 View
Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)
03 August 2024 8,537 4 View
Do these peaks in the curve indicate primer dimer or non-specific products?
01 August 2024 7,465 0 View
What is the best way to freeze the rat brain - liquid nitrogen, Dry ice , isopentane - after isolation for later protein investigation by Elisa?
01 August 2024 1,722 1 View
I need to Postfix mice brains. I slice the brains using microtome at 40 microns. These are Postnatal days 7, 11, 14, and 21. I am using half the brain for other analysis, so I need to fresh freeze...
31 July 2024 1,121 4 View