Does pressure effects hydrogen production from salt water electrolysis?

More Mehedi Hasan Tusar's questions See All

How to change number mode from scientific mode to normal mode in axis of a graph using matlab, also how to modify the range?

i want to visualize this reynolds number in x axis in normal mode. but they are in scientific mode. what code should i write to change it. i am using matlab

04 May 2018 768 2 View

Which viscous model should i use for CFD study of twisted tape insert for turbulent flow region?

i want to simulate heat transfer enhancement using twisted tape insert for turbulent flow but want to know which viscous model should i use and how i input heat energy in the tube surface (using...

04 May 2018 1,114 4 View

What is the heat transfer characteristics of turbulent flow in tube if surface is exposed to constant heat flux for a tube with insert andno insert ?

i have simulated (in fluent) the heat transfer for turbulent flow of air in a tube of which surface is exposed to constant heat flux of 8000 w/m2. for two conditions 1) plain tube only 2) tube...

04 May 2018 3,720 2 View

How to find the element of a matrix that is responsible for biggest difference between two matrix in MATLAB?

i have two matrix. A=[e f g h i]; B=[j k l m n]; E=max(A-B); now what i need to do is find the elements of corresponding matrix that makes the biggest difference. then subtract this element of A...

04 May 2018 3,088 3 View

While i tried to enter aip website it shows your ip is blocked due to abuse monitoring. what does it mean?

they asked to contact with my library admin. can anybody say what might be the reason?

03 April 2018 4,489 4 View

How to find the solar tilt angle of solar collector for a particular location and does it have seasonal variation?

i want to calculate solar tilt angle for a particular location and how it varies in different season.

02 March 2018 2,713 5 View

how i can simulate single phase heat transfer in water inside a tube in ANSYS of which surface is exposed to variable heat flux with location?

i have the heat flux profile of a receiver for a parabolic trough system in .dat and excel format both simulated from Tonatiuh. i tried to simulate heat transfer in water inside the receiver but...

01 February 2018 1,779 2 View

What is the best way to keep an anaerobic chamber anoxic in the absence of hydrogen?

I'm a graduate student who works with an anaerobe, so I often work in an anaerobic chamber. I've been working on an assay that involves the steady-state of the quinone/ quinol pool. Anoxic...

03 March 2021 2,971 1 View

How can we obtain a modification factor for creep parameters?

I want to obtain standard creep parameters of salt rock by creep parameters of rectangular samples. Is there a modification factor to convert creep parameters of rectangular (prismatic) rock salt...

01 March 2021 7,131 1 View

How to separate water from glycerol solvent in a solvent recovery vacuum distillation column?

I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...

01 March 2021 9,525 4 View

Anyone found any research papers on solar furnace design calculations (for solar concentration)?

I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...

01 March 2021 5,023 5 View

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...

01 March 2021 3,703 3 View

What are the most relevant MSc proposal topics for Petroleum Production Engineering at the moment?

I am a Petroleum Production Engg MSc student at Robert Gordon University in Aberdeen and I am in the process of selecting a topic for my MSc Engineering Investigation proposal. I would very much...

01 March 2021 7,396 4 View

Why is the sum of the elements in a row in a Q matrix equal to zero?

When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?

28 February 2021 3,864 3 View

can I treat waste water containing solvents and alcohol with electrocoagulation?

there are solvents and alcohol in the waste water of a factory that produces disinfectants. Increasing this waste water requires very serious operations. Can I treat this waste water with...

27 February 2021 2,609 3 View

Which transition metal salt precursor is best for doping? Why?

I would like to synthesize a transition metal doped TiO2 via solgel method. Hence, I would like to know which metal salt precursor to choose among Chloride, Nitrate, and Sulphate. A clear...

27 February 2021 4,285 3 View

Does different dilution factors affect negatively on NH3 reading ?

I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...

27 February 2021 8,483 3 View

Yurii V Geletii

Your question is not correctly formulated. Probably you ask whether the partial pressure of H2 in electrolyzer affects the rate of H2 production at constant applied potential. If so, the answer is yes. The other questions do not have a simple answer. Everything depends on conditions.

Mehedi Hasan Tusar

thanks for your answer. can you suggest me some relevant literature?

Textbooks on electrochemisty.