We have a few corrosion setups that we are looking to upgrade and to develop their advanced versions. We need people who can work with us to design and develop the same. All help is appreciated.
What type of corrosion equipment are you interested? ovens, EC cells, Electronics?
We have prototypes of a vertical movement wet dry corrosion setup and a droplet cell for localized corrosion studies. There are a few designs that we have in mind and we are looking for some company to help us make them, majorly mechanical.
Dear Shyama
Try to look at either Gamry instruments or
Princeton Applied Research instruments Companies notes on corrosion.Refer tothe following links:
(https://www.gamry.com/application-notes/)
(https://greenrs.com.sg/library/application-notes/princeton-applied-research/)
There are a lot of information in those notes in which one can build his/her own
corrosion instruments.
Hi Shyama
If you looking for a corrosion workstation to study local area, I suggest Uniscan instruments (Bio-logic) M470 is perfect:
https://www.bio-logic.net/products/scanning-probe-workstation/.
they can offer a powerful workstation including; LEIS, SKP, SVP, OSP, SDS, and SECM.
Good luck
Gobara
Thanks to everyone for their feedback. We are trying to go for a small company or group of people for the mechanical constructions rather than buying established instruments. Thanks again for the suggestions.
Shyama Deepak Ranade
Hi Shyama,
Please have a look at the following links. There is a company by name "Kanopy Techno Solutions", it is by the students of IITK, which may serve your purpose.
http://www.kanopytech.com/
http://www.iitk.ac.in/siic/d/content/kanopy-techno-solutions
Thanks and regards.
Venkat.
Hi Shyama, this may be something we can do with you. When are you available to speak?
One of the best methods for corrosion studies is Electrochemical Impedance Spectroscopy or EIS. Look this up.
Shayma
What you are doing is right.
I do not advise you to go for companies that can cost you a lot!
Corrosion lab does not need a company to design or construct based on my experience in Canada and UK.
I myself established a corrosion lab in Qatar University and did every thing my self based on the different corrosion labs I saw in my life.
You just need a space and typical lab set up with few modification though.
Whatever you are going to do depend on what type of experiment you are going to conduct, therefore you buy the equipment which you can start with. then you could add more as needed.
Hope that helps!
Elsadig
- Badges
- Science topic
- Similar topics
- Chemistry
- Electrochemistry