I want to use DC motor and torsional shaft tools via PSCAD but rotational speed, mechanical torque and electrical torque have the unit of p.u. Do you know the base values ?
Dear Ece Kurt
Please see the attachments sites
Regards
http://forum.hvdc.ca/1829470/electrical-torque-in-per-unit-PMSG
https://pdfs.semanticscholar.org/f1e0/fa4fa6be56e1c48785eec45cc9c929ebb16f.pdf
http://www.ece.uidaho.edu/ee/power/ECE404VSC/Lectures/L6/L6.pdf
https://www.esig.energy/wiki-main-page/pscad-modules-representing-pv-generator/
The base values are the rating values
Thank you so much ! Anees Abu Sneineh
the p.u can be calculated by division the rating value on the base value
I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...
03 March 2021 3,661 2 View
Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?
01 March 2021 9,447 3 View
Hello every body Does any one has any idea to help me choose a reasonable basis set for intermediate metal ions (i.e Fe2+, Mn2+, Cu2+ and exc.) interactions with guanine or other DNA organic...
01 March 2021 6,187 2 View
01 March 2021 7,254 3 View
Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...
28 February 2021 3,442 2 View
For example in one research article the Elemental analysis values of COF-TpPa-1 ( Triformylphloroglucinol (Tp) (63 mg, 0.3 mmol), Paraphenylenediamine (Pa-1) (48 mg, 0.45 mmol) are as follows...
24 February 2021 1,265 6 View
24 February 2021 4,833 3 View
Currently trying to obtain as many pieces of research as possible for my dissertation around the implementation of DBT within the inpatient unit for those with a diagnosis of BPD. Primarily...
23 February 2021 5,654 2 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
Hello, I asm currently working with alginate and silk fibroin hydrogels. I prepared a blend of alginate and aqueous silk fibroin (straight from dialysis) and resorted to ionic crosslinking to...
23 February 2021 8,249 2 View
We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...
03 March 2021 7,975 3 View
Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...
02 March 2021 2,431 3 View
Which tools can be used to generate machine codes for additive manufacturing?
02 March 2021 7,220 2 View
Does anyone have the experience of using Taq Man probes in the QIAGEN Rotar- Gene qPCR machine?
01 March 2021 5,311 1 View
I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...
27 February 2021 8,483 3 View
We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...
25 February 2021 568 1 View
25 February 2021 1,987 3 View
I am working on single trial motor imagery data i.e. EEG data. I am following a paper which has a dataset from BCI challenge IV (dataset 2b). After removing noise and extracting all the data from...
23 February 2021 5,503 1 View
I am thinking of electrifying the street food carts while harvesting energy using solar panels on top.
22 February 2021 4,323 3 View
My real system (buck converter) can only take an input of 0 to 1 (duty ratio) and I need to constrain the system so the controller action keeps within this bounds. How can I do this? The code for...
22 February 2021 2,125 3 View