Creating asymmetric tilt grain boundary?

Hui Zhang @Hui_Zhang178

11 November 2017 0 7K Report

Hello folks,

Are there any software or scripts that can help to build asymmetric tilt grain boundary for HCP? Many thanks.

Regards,

Hui

Badges
Science topic

More Hui Zhang's questions See All

What is semi-rigid boundary?

Hi, For the Molecular Dynamics simulation of bi-crystal, the surfaces (with certain thickness) of the upper and lower grains are typically set as the so-called semi-rigid boundary condition. I...

01 February 2018 1,720 0 View

Angle/axis pair for {10-12}<10-1-1> twinning

The rotation axis and rotation angle calculated by the orientation matrix for the {10-12} twinning is the normal of {10-12} and 180 degrees, respectively, which is correct for type...

04 May 2017 7,661 6 View

GC-MS retention index prediticon?

Hello experts, Does anyone know any free software about retention index prediction ?

08 August 2024 7,403 2 View

How does grain and grain boundary affect the ceramic when studying its dielectric properties?

I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...

07 August 2024 5,177 3 View

Can anyone provide me with molecular docking softwares/ websites?

Molecular docking software/ websites?

02 August 2024 8,704 7 View

I am working on my Master's thesis on the biogeography of the genus Ruagea and I would like to ask, could someone help me to check whether my result?

I created a file with my outgroup and ingroup species using Beauti, ran it in BEAST, viewed it in Tracer, and then used TreeAnnotator to create a file that I imported into RASP. Could someone...

28 July 2024 2,979 1 View

Can we convert a thousand of FASTA sequence in numeric form in .csv format? If yes kindly send me the script for the same?

I have a .text file for various FASTA sequence , and i want to convert these sequences into a numeric file which will be in .csv format. OR I want to extract physiochemical properties(features)...

25 July 2024 3,650 2 View

Which software tools are best for enhancing diagnostic accuracy in chest X-ray imaging using image reconstruction and neural networks?

I am reaching out to seek your valuable advice and recommendations regarding the best software tools to use for this research. Specifically, I am looking for software with a user-friendly...

22 July 2024 3,794 1 View

How to test multivariate outlier in STATA?

Hey all, I need help testing for multivariate outliers using STATA for my master thesis. The literature recommends the Minimum Covariance Determinant (MCD) (Verardi & Dehon, 2010). I found the...

22 July 2024 8,821 2 View

How Do Length of Pylon and Rotor Disk Radius Impact Angular Frequency and Torsional Stiffness in Whirl Flutter Analysis for a 2 DOF Propeller System?

Actually, I'm having trouble implementing the plot of the flutter region for the whirl prop system with 2 DOF (Influences of structural damping and propeller—pivot point distance on whirl flutter...

21 July 2024 5,047 2 View

How to display grain boundaries in RVE model?

Many literatures have shown that the RVE model shows the grain boundaries between different grains. How can this be achieved using DAMASK+paraview?

21 July 2024 9,224 1 View

MDCI module in Orca software?

Dear Researchers, My question is associated with the "MDCI" method in Orca. Please let me clarify my question using a simple example: Suppose we are going to perform CBS extrapolation using "!...

21 July 2024 1,632 0 View