Hallo,
We need piezoelectronic pressure sensor for oscilloscope measurement up to 120 bar or less (40 bar) for observe dynamic pressure waves during pulsed arc electro hydraulic discharge (3 kv) between iron rods into distilled water environment .
The main demand for pressure sensor is that it should work in the water environment under voltage (as during discharges contact fluid is in touch with sensor) and it also should catch 300 nanosecond duration pressure waves. Any design is secondary meaning.
Mainly sensors have metal body (with thread) which I think would be affected voltage damage or measurement failure.
Could you propose any product suitable for our measurement OR may consult with different measurement solution of dynamic pressure change (for example, indirect measurement of pressure change by sound waves, etc.)
Also need temperature sensors for water temperature change during discharge. It sholudn’t be as fast response as pressure sensor.
see reference:
K.Hattori, H.Makino, K.Momose, A.Ando, and M.Inutake, Water Treatment by Pulsed Arc Electrohydraulic Discharges (see attached picture)
Thank you for supporting in advance and waiting for your positive reply. Regards, Vladimer Mikelashvili