What are the manufactures of polymer containing carbon nano tubes ?

What is the best industrial method for manufacturing polymers containing carbon nano-tubes composites materials . if there is any existing companies dealing with such composites , please let me...

31 December 2018 9,817 3 View

What is the best way to deposit graphene sheets on the Cu sheet?

03 April 2016 6,848 6 View

Is there any difference between GNP and graphene ?

if there is a table shows their properties? thanks in advance

11 December 2014 3,754 4 View

Why was the melting temperature of PET in the second heating run (DSC) lower than that obtained from the first run?

Any idea please?

10 November 2014 639 5 View

What do dispersion and distribution of the filler into polymer matrix mean?

10 November 2014 5,355 9 View

What is the tensile modulus of CNTs and GNP?

10 November 2014 8,527 8 View

Why 120 c is usually used for the acid treatment of CNTs?

10 November 2014 7,320 3 View

Why two heating runs usually do in DSC , what is the difference ?

10 November 2014 7,341 5 View

Why do thermoplastic polymer crystallize at all ?

Any help please

10 November 2014 966 1 View

What is the difference between quenching my PET or cooling it slowly?

10 November 2014 3,107 5 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

How do I determine the degree of polymerization of PEG 400 based on NMR integration?

Hello, I am working on the photocatalytic degradation of PEG 400. I would like to know if it's possible to determine the degree on polymerization based on NMR integration, or by the MW of the...

02 March 2021 6,186 3 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

What are anisotropic electrical and optical properties of a semiconductor due to?

In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?

01 March 2021 1,923 3 View

Can polymer concentrations be calculated based on the number average molecular weight?

Hello, I spin-cast two different polymers onto wafers and measure their height as a function of initial concentration. For polymer A, I have the weight-average molecular weight (Mw) as well as...

28 February 2021 7,882 2 View

POlymer+DMSO solution and moisture??

What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?

28 February 2021 6,516 5 View

Can impedance of antenna be less than 50 ohms?

I am simulating helix antenna in hfss, right now, giving excitation with 50 ohms port. When I see the results of Z parameter (real). It shows lower than 50 ohms. Do not understand, if it can be...

27 February 2021 4,218 7 View

Should we reduce the standard unit of length to 0.31951540592 meter ?

The reasoning behind this question is to align the ratios of the proton potential in energy per charge to the speed of light in distance per time. As these two dimensions appear to be related,...

27 February 2021 947 7 View