I have read that boiling and stirring should degas the water, but does it dissolve again upon cooling?
Well,
Certainly, the gases are soluble in water again for as long as there is any degree of contact. The degree of solubility depends on the surrounding conditions.
Degas in condition of isolation with air.
Sincerely
Reduce the pressure in the fluid and the dissolved gases will be removed from it.
When a certain limit is reached, cavitation begins, which leads to the complete degassing of the fluid.
Following
Do you believe it is possible to adjust the Zeta potential by applying an external voltage? I have managed to reach an absolute value of the Zeta potential below 30 mV by adjusting the pH. Thank you!
31 December 2017 4,800 5 View
Could someone help me find out the size of an isohexane and acetone molecule? Is there a way to calculate it? Any references?
05 June 2017 2,680 1 View
I am trying to obtain a soft cake. I know for slow sedimentation rate, the cake will be hard. What could I add in water to ensure a fast sedimentation rate?
03 April 2017 613 8 View
07 August 2016 3,399 3 View
31 December 2015 7,193 1 View
The figure shows DSC cooling (blue) and 2nd heating (green) curves (step: 10 K/min) for a commercial sample supplied as Atactic Polypropylene (APP). The heating curve illustrates two major...
03 March 2021 5,857 3 View
I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...
01 March 2021 9,525 4 View
I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...
01 March 2021 3,703 3 View
Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...
01 March 2021 2,622 3 View
When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?
28 February 2021 3,864 3 View
I have used an AllPrep DNA/RNA/Protein Mini Kit QIAGEN kit to extract RNA and protein from my samples. At the end of the protein purification, I resuspend my protein in 5% SDS. Will these samples...
28 February 2021 7,370 3 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...
27 February 2021 8,483 3 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...
26 February 2021 4,026 5 View