Are there any connections between Central pattern generator– central and peripheral fatigue on running gait variability?
One problem w the BOD bottle type of OUR measurement is that it can only be used in a system that is not DO limited (typically assumed about 2 mg/l or more). If the system is running at low DO and...
01 July 2024 1,282 2 View
Oxygen transfer in the activated sludge system involves physical mass transport across a two-film layer that consists of a gas film and a liquid film. For gases with limited solubility such as...
22 June 2024 5,044 0 View
activated sludge treatment plant treatment process
19 March 2024 10,005 4 View
We all know that in any gas-liquid dissolution interactions, under a constant rate of gas supply, the basic equation is given by: dC/dt = K1 (K2 - C) where K1 and K2 are arbitrary constants, dC/dt...
15 December 2023 6,429 9 View
I have deposited a layer of thiolate nanoparticles onto the substrate surface. Used dye and verified that SH group is active. Then I tried to use a maleimide/NHS ester crosslinker, but it seems...
16 November 2023 1,478 1 View
I have seen dosing in mg but never in ml. Any idea?
30 April 2023 4,108 0 View
Dear everyone, I am helping out a colleague to prepare an ERC starting grant and we are looking for successful applications from the social sciences and the humanities to hae an example....
13 April 2023 4,968 0 View
temperature correction factor is requested
03 February 2023 8,780 3 View
It is well known that for domestic wastewater using a UASB reactor the following parameters holds true HRT=4-12hr OLR=1-3mg/l up-flow velocity=0.5-1.5m/hr.etc In addition to the above parameters,...
18 February 2022 7,049 3 View
I am trying to solve a time-dependent diffusion equation with finite-difference discretizations using the Newton–Raphson method. However, I encountered some problems in convergence--the solution...
02 February 2022 6,108 4 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...
06 August 2024 4,953 0 View
I am analyzing cherts from different sources found within one specific geologic formation using ICP-MS/ES. My committee was asking this question about my analysis. I was not sure how to answer this
05 August 2024 7,902 3 View
Hello guys! Do you have experience running a Oaxaca-Blinder decomposition on R applying person weights. How do you suggest doing it? I have a variable PERWT which gives more information on how...
04 August 2024 6,033 0 View
I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from experts in the field. If you are an expert or researcher working on...
02 August 2024 2,627 1 View
Hello Everyone I have a question about structure for connectivity analysis on sources. My goal: preprocess and cut data into trials create headmodels, using template MRI file perform source...
30 July 2024 2,744 1 View
When I run autogrid4 it says: autogrid4: ERROR: Unknown receptor type: "Cr" -- Add parameters for it to the parameter library first! Look forward to your reply.Thank you so much!
29 July 2024 488 0 View
I am trying to run a restart analysis, which imports deformed configurations of parts from a generated ODB file. It runs fine in Windows OS but when I try to run it in Linux OS, it is giving some...
29 July 2024 9,572 3 View
Our department has recently acquired an HPC (High-Performance Computing) system, and I'm thrilled to take my molecular dynamics calculations to the next level using Desmond. I used to run my...
28 July 2024 6,553 1 View
I am preparing to run a lot of samples on a 384 well plate and I wanted to test if any well in my PCR machine is dead so as not to lose any data. I would really appreciate help with how I can do...
24 July 2024 8,172 1 View