SVPWM allows over modulation region of operation, but with reduced output quality. In the over modulation region, DC bus utilization is improved. To what extend can we improve the DC bus utilization?
The maximum voltage is increased by 15%. Under sinusoidal PWM modulation, the maximum line-to-line voltage is equal to sqrt(3)/2*Vdc, whereas under SVM, the maximum is Vdc. 1/(sqrt(3)/2) = 1.15.
In the SVPWM we say the forbidden region and not the ovetmodulation region. theoretically and by simulation yes but practically is difficult, moreover, the use of this region will increase the THD.