Can N-Boc deprotection achieved by simple heating (without acid/water) ?

More Anjali Preman's questions See All

Can anybody help me with an efficient way to de-protect poly(tert-butyl norbornene-2-carboxylate)?

I want to make poly(norbornene 2-carboxylic acid), for the sake of characterization, I decided to start with the protected monomer norbornene-tert-butyl-2-carboxylate for the ring-opening...

03 December 2020 3,852 5 View

Why Schiff bases change colour upon evaporation?

I got bright yellow coloured Schiff base after 6 hour reaction time. So i kept it for slow evaporation. Solvent was methanol. But after complete evaporation my product colour changes from yellow...

17 November 2020 3,824 2 View

Has anyone observed delamination of pyrolysed SU-8 on SiO2 coated Silica substrates when the pyrolysis is performed outside cleanroom?

We have a quartz tube furnace (diameter 80 mm) outside the cleanroom and when tried to pyrolyse the SU-8 on SiO2 coated Si substrates at 900 C in nitrogen atmosphere, the electrodes looks fine....

08 November 2020 4,357 2 View

Is there any chance for synthesis Schiff bases using 4-methyl-5-imidazole carboxaldehyde?

Is there any chance for getting product using the above aldehyde and different amines.

12 July 2020 8,330 2 View

Can anyone help me finding good impact factor journals to submit uninvited review paper on postharvest chilling injury in fruits.?

I have tried submitting my review paper in relevant journals, but most of them only accept the review paper invited by the editor of the journal

28 June 2020 4,371 5 View

What is an alternate way to recover a polymer product from DMSO or DMF other than evaporation?

Due to the high b.p of DMSO and DMF (189 and 153 degree Celsius), it is difficult to recover my polymer from the solution. I believe extraction in a triple system (such as DCM, DMSO and water)...

04 March 2020 3,028 12 View

What were the active sites on the magnetic activated carbon surface for adsorption of reactive dyes? Were they carbon atoms or Fe3O4?

In the adsorption process by using adsorbent magnetic-activated carbon for removal of reactive blue 13 dye which contains -N=N- group, SO3 group, OH, Cl, etc. In this process what are the active...

24 February 2020 1,110 4 View

Why i am getting only one peak at 280 nm for dyes ?

I prepared aminobenzothiazole reacted with amino phenol azo dyes but on taking UV I got single peak. Why I couldn't get 2 peaks?

18 February 2020 6,949 3 View

Could anyone please help me to get my schiff base product?

Hereby I am explaining the detailed procedure which i done in my lab. 1:1 molar ratio of 2-amino benzothiazole and 4-nitro benzaldehyde were refluxed for 12hr at 100 degree Celsius in toluene...

24 January 2020 5,094 3 View

Is it possible to determine the molecular weight of emulsion polymers by GPC?

I performed an emulsion polymerization of tert-butyl acrylate using KPS as initiator. I confirmed the formation of polymer by NMR. But when I tried to determine the molecular weight using GPC, GPC...

12 January 2020 6,711 8 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

How to remove DCU and HOBT from my reaction?

I am doing a acid and a chiral amino alcohol reaction using DCC and HOBT in DCM or THF? Can anyone suggest me how to remove DCU and HOBT from a reaction mixture??

28 February 2021 2,153 1 View

What is the most common number of epitopes in an multi-epitope Vaccine?

hi everyone, I'm interested in the field of vaccine design specifically multi-epitope cancer vaccines , I want to know if there is a minimum and maximum number of epitopes we could use in a...

27 February 2021 3,882 3 View

Can thermal cycler machines be problematic during PCR?

Hi, my question is about the heating of thermal cycler machines and I hope some of you had experienced a similar thing previously. There are two thermal cycler machines in the lab(BioRad) and for...

26 February 2021 4,777 4 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is it efficient to do liquid biopsy to investigate the gene expressions of the tumor?

To do liquid biopsy and look for specific gene expressions there are so many published papers. Thera are different protocols and procedures used to isolate circulating cell free RNA or mRNA from...

23 February 2021 7,326 5 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View